DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 7
Remote control
a
POWER (1) : Switches the unit ON or OFF.
OPEN/CLOSE (Z) : Opens and closes the disc tray.
Numerical buttons: Selects numbered items in a menu.
CLEAR : Removes a track number on the Program a List or a mark on the Marker Search menu.
TV : TV control buttons.
b
SCAN (m / M) : Search backward or forward. SKIP (. / >) : Go to next or previous
chapter/track.
PAUSE/STEP (X) : Pauses playback
b temporarily/press repeatedly for
PLAY (N) : Starts playback.
STOP (x) : Stops playback.
c
DVD MENU : Access the DVD menu.
c TITLE : Access the disc’s title menu, if available. vV b B : Navigates the menus.
ENTER ( 
) : Confirms menu selection.
DISPLAY : Accesses
RETURN (O) : Press to move backwards in the menu or exit the menu. Change the USB mode. AUDIO ( 
) : Selects an audio language or audio channel.
d | SUBTITLE ( | ) : Selects a subtitle language. |
ANGLE ( | ) : Selects a DVD camera angle, if avail- |
able.
SETUP : Accesses or exits the setup menu.
d
MARKER : Marks any point during playback.
SEARCH : Displays MARKER SEARCH menu.
PROGRAM : Enters the program edit mode.
ZOOM : Enlarges video image.
REPEAT : Repeats a chapter, track, title or all.
RESOLUTION : Sets the output resolution for HDMI jack.
: Button is not available.
Controlling other TV’s with the remote control
You can control the sound level, input source, and power switch of your LG TV with the supplied remote control. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below). Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Depending on your TV, some or all but- tons may not function on the TV, even after entering the correct manufacturer code.
Manufacturer | Code Number |
|
|
LG/GoldStar | 1 (Default), 2 |
|
|
Zenith | 1, 3, 4 |
|
|
Samsung | 6, 7 |
|
|
Sony | 8, 9 |
|
|
Hitachi | 4 |
|
|
Put the battery into the Remote Control
Remove the battery cover on the rear of Remote Control, and insert battery (size AAA) with + and – matched correctly.
7