Onkyo TX-SA705 instruction manual Changing the AV Receiver/AV Amplifier’s ID

Page 94

Advanced Setup—Continued

.Changing the AV Receiver/AV Amplifier’s ID

1Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

2 Use the Up and Down []/[ ]

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

ENTER

ENTER

buttons to select “7. Hardware Setup,” and then press [ENTER].

The Hardware Setup menu appears.

7. Hardware Setup

1. Remote Control

2. Zone2

3.Tuner

4.Analog Multich

5.HDMI

3

Use the Up and Down [ ]/[ ]

 

buttons to select “1. Remote

 

Control,” and then press

 

[ENTER].

 

 

ENTER

 

 

The Remote Control menu appears.

 

7–1. Remote Control

 

 

Remote ID

1

 

ENTER

 

4

Use the Left and Right [ ]/[ ]

buttons to select a value.

Remote ID

With this setting, you can change the AV receiver/AV amplifier’s remote con- trol ID. You may need to change this if the remote controller’s control codes overlap with those of another Onkyo component located in the same room. If you change the AV receiver/AV amplifier’s remote control ID, be sure to set the same ID on both the AV receiver/AV amplifier and remote con- troller (see page 98). The default ID for both is 1.

94

Page 93 Page 95
Image 94
Page 93 Page 95
Contents TX-SR705 Important Safety Instructions For North American model PrecautionsPower FCC Information for UserPrecautions For British modelsSupplied Accessories Make sure you have the following accessoriesProcessing FeaturesAmplification ConnectionsTable of Contents Front & Rear Panels Front PanelFront & Rear Panels Display TX-SR705 North American model Rear PanelTX-SR705 other than North American model  Sirius antenna North American models only  Digital Optical in 1, 2 and OUT Digital Coaxial in 1, 2  XM antenna North American models onlySUBWOOFER, Surr L/R, and Surr Back L/R AC Outlet North American and European models onlyInstalling the Batteries Remote ControllerAiming the Remote Controller Using the Remote Controller Remote ControllerRECEIVER/TAPE Mode  Standby button Remote Mode buttonsTape mode  on buttonDVD Mode CD/MD/CDR Modes OPEN/CLOSE buttonDock Mode About Home Theater Enjoying Home TheaterOptical Digital Jacks Connecting the AV Receiver/AV AmplifierAbout AV Connections AV Connection Color CodingConnecting the AV Receiver/AV Amplifier Connecting Your SpeakersRead the following before connecting your speakers Speaker Connection PrecautionsConnecting the Speaker Cables Strip about 5/8 15 mmBi-amping the Front Speakers Bi-amping Speaker HookupConnecting the AM Loop Antenna Connecting Antenna TX-SR705 onlyConnecting the Indoor FM Antenna Attach the FM antenna, as shown North American modelsConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Which Connections Should I Use? Connecting Both Audio & VideoHdmi Monitor Setting Set to Yes Video Connection FormatsHdmi Monitor Setting Set to No Audio Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection HintConnecting a DVD Player Hooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback Connecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Game Console Connecting a Camcorder or Other Device Camcorder, etcSupported Audio Formats Connecting Components with HdmiAbout Hdmi About Copyright ProtectionAudio Signals Video SignalsMaking Hdmi Connections CD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with no Phono Preamp Built-in Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Power Amplifier Connecting a Tuner TX-SA705 onlyIPod without video Connecting an RI DockIPod with video If you have an Onkyo DS-A1 RI DockConnecting the RS232 Port Connecting Onkyo ComponentsConnecting the Power Cord Turning On and Standby Turning On the AV Receiver/AV AmplifierSmooth Operation in a Few Easy Steps Menus for First Time Setup First Time SetupUsing the Onscreen Setup Menus Press the Receiver button fol- lowed by the Setup buttonPress the Receiver button, followed by the Setup button First Time SetupSpeaker Settings Speaker Setup menu appearsInput/Output Assign menu appears Hdmi Monitor SetupSetup menu closes Monitor Out menu appearsHdmi Input Setup Video Input SetupHdmi Input menu appears 1 Use the video component connected to Compo Component Video SetupComponent Video Input menu appears 2 Use the video component connected to CompoChanges in this order Changing the Input DisplayTape o MD o CDR o Dock Digital Input Setup OSD Setup menu appears TV Format Setup Not North American modelsWhen you’ve finished, press the Setup button You must specify the TV system used in your areaHardware Setup menu appears AM Frequency Step Setup on some modelsUse the Left and Right Using Audyssey MultEQ XT Automatic Speaker Setup Audyssey MultEQ XTMeasurement Positions Speaker detect results appear CancelPress Enter NextThen press Enter Disconnect the speaker setupButtons to select an option, MicrophoneWriting Error Error MessagesSpeaker Detect Error Ambient noise is too highUsing a Powered Subwoofer Changing the Speaker Settings ManuallyReviewing the Results Basic Operations Select a listening mode and enjoySee Using the Listening Modes on Selecting the Input SourceMulti CH indicator appears on the display Using the Multichannel DVD InputAdjusting the Bass & Treble Basic OperationsUsing Headphones Setting the Display BrightnessUsing the Sleep Timer Muting the AV receiver/AV amplifierListening to the Radio TX-SR705 only Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting AM/FM StationsSelecting Presets Select the preset that you want to deleteWhat is RDS? Using RDS European models onlyRDS Program Types PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Selecting Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV receiver/AV amplifierListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources DSD, Dolby Digital, and Dolby Digital Plus Sources SacdTrueHD and DTS Sources DTS-ESDTS-HD Sources Use this mode with any stereo movie e.g., TV, DVD, VHS About the Listening ModesDSD Theater-Dimensional Onkyo Original DSP ModesAV Recording RecordingRecording Separate AV Sources Advanced Operations Using the Re-EQ FunctionAdjusting Individual Speaker Levels Dolby Digital, Dolby Digital PlusAdvanced Setup About the Onscreen Setup MenusSpeaker Settings Advanced SetupSpeaker Setup Buttons to select SubwooferUse the Up and Down / buttons to select LPF of LFE Low-Pass Filter for the LFE ChannelFrequency If no surround back speakers are con- nected, select NoneSetup menu closes Double BassSpeaker Distance Repeat for all speakers Press the Setup buttonUse the Left and Right Buttons to specify the distance Speaker Level Calibration Mally listen at volume settings below this, be carefulBecause the test tone will be much louder Equalizer Setting EnterButtons to select another THX Audio SetupButtons to select 2. Speaker Setup, and then press Enter SpeakerSubwoofer Input Sensitivity Multichannel DVD Input SettingsButtons to select 7. Hardware Setup, and then press Enter Ft 0.3-1.2 m Select this if yourTone Control Settings Audio Adjust FunctionsMultiplex/Mono Settings Theater-Dimensional Listening Setting PLIIx/Neo6 Music Mode SettingsDolby EX Input Signal Setting LFE Level SettingsSignal format selection menu appears Listening Mode Preset menu appearsAssigning Listening Modes to Input Sources When you’re finished, press the Setup button Source SetupSource Setup menu appears Level can be set from -12 dB to +12 dB in 1 dB stepsA/V Sync menu appears Right / buttons to adjustDelay from 0 to 250 millisec Press Enter to view the TV picture, and use the LeftTo correct a character Name EditName Edit screen appears 123456789 Volume Setup menu appears Volume Setup/OSD SetupVolume Setup This section explains the items on the Miscellaneous menuOSD Setup See TV Format Setup not North American models onChanging the AV Receiver/AV Amplifier’s ID Lip Sync Hdmi SetupHdmi Audio Out XvYCCControl Power ControlTV Control Off, try setting the format to PCM Lock SetupDigital Input Signal Formats Buttons to select 8. Lock Setup, and then press EnterRemote indicator flashes twice Changing the Remote Controller’s IDRemote indicator flashes four times Use the number buttons to enter ID 1, 2, orUsing Only Speakers in Zone Connecting ZoneUsing a Receiver/Integrated Amp in Zone ZoneSetting the Powered Zone 100101 Using ZoneControlling Zone 2 with the Remote Controller Controlling Zone 2 from the AV receiver/AV amplifier102 Adjusting the Volume for ZoneTo Mute Zone Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with Zone103 Controlling Other Components Entering Remote Control CodesRemote indicator lights up 104Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting Remote Mode Buttons 105106 Learning Commands 107Making Macros Using Macros108 Running MacrosSpecifications 109Troubleshooting 110Troubleshooting 111112 113 Memo 114115 3 4 4 4 7 6 a

TX-SA705 specifications

The Onkyo TX-SA705 is a versatile AV receiver designed for audiophiles seeking an immersive home theater experience. Combining advanced technology with user-friendly features, this receiver is well-suited for both casual listeners and serious home theater enthusiasts.

One of the standout characteristics of the TX-SA705 is its impressive power output. Delivering 100 watts per channel across seven channels, it ensures that audio plays back with clarity and authority, providing enough power to fill large rooms with rich sound. The receiver supports a range of surround sound formats, including Dolby Atmos and DTS:X, allowing users to experience cinema-quality audio at home. These technologies create a three-dimensional sound environment, immersing listeners in the action.

Connectivity is another key feature of the TX-SA705. The receiver is equipped with multiple HDMI inputs, supporting 4K video passthrough and HDR for stunning visuals. With ARC (Audio Return Channel) capability, the TX-SA705 simplifies the connection to compatible televisions, allowing for easy audio output. The inclusion of Bluetooth technology enables wireless streaming from smartphones and tablets, making it more convenient to enjoy music from various sources.

The Onkyo TX-SA705 also boasts an intuitive user interface designed for ease of use. The graphical user interface helps users navigate settings and options seamlessly, while the included remote control features direct access buttons for the most commonly used functions. Furthermore, the receiver is compatible with Onkyo's Controller app, providing additional control through smartphones.

In terms of sound customization, the TX-SA705 stands out with its advanced equalization features. The receiver incorporates Audyssey technology, which automatically calibrates audio settings based on room acoustics. This ensures optimal sound performance tailored to the specific environment.

Finally, the build quality of the TX-SA705 is noteworthy. Onkyo has designed this receiver with a sturdy chassis and high-quality components that enhance durability and performance. The TX-SA705 not only delivers impressive audio-visual performance but is also built to last, making it a wise investment for any home theater setup.

In summary, the Onkyo TX-SA705 combines powerful audio performance, modern connectivity options, and intelligent sound optimization features to create a receiver that meets the demands of contemporary home theater systems. Whether for movie nights or music playback, the TX-SA705 is a fantastic choice for an immersive entertainment experience.
Top Page Image Contents