LG Electronics M2901S, M3801S Position Command f q, Position Command f r, Serial No.Command f y

Page 36


	RS-232C		Controlling the Multiple Product

Transmission / Receiving Protocol

27.H-Position (Command : f q)

► To set the Horizontal position

Transmission

[f][q][][Set ID][][Data][Cr]

* The data range is from 00 to 64(in Hex)

28.V-Position (Command : f r)

► To set the Vertical position.

Transmission

[f][r][][Set ID][][Data][Cr]

* The data range is from 00 to 64(in Hex)

29.Serial No.(Command : f y)

► To read the serial numbers.

Transmission

[f][y][][Set ID][][Data][Cr]

Data FF (to read the serial numbers)

30.S/W Version(Command : f z)

► Check the software version.

Transmission

[f][z][][Set ID][][Data][Cr]

Data FFH : Read

31.Product Type(Command : f v)

► Check the product type.

Transmission

[f][v][][Set ID][][Data][Cr]

Data FFH : Read

32.Model Name(Command : f w)

► Check the model name.

Transmission

[f][w][][Set ID][][Data][Cr]

Data FFH : Read

Acknowledgement

[q][][Set ID][][OK/NG][Data][x]

Acknowledgement

[r][][Set ID][][OK/NG][Data][x]

Acknowledgement

[y][][Set ID][][OK/NG][Data][x]

Acknowledgement

[z][][Set ID][][OK/NG][Data][x]

Acknowledgement

[v][][Set ID][][OK/NG][Data][x]

Acknowledgement

[w][][Set ID][][OK/NG][Data][x]

A11

Image 36

Contents Monitor Signage Page Using the Remote Control Using the Remote Control Name of the Remote Control ButtonsInserting batteries into remote control AC Power Connector Connect the power cord Name and Function of the PartsRear View EXT. IR External IRConnecting to External Devices When Connecting to your PCConnect the power cord When using the LAN Turn on power by pressing the power button on the productHdmi signal D-sub signal Turn on the PCDaisy Chain Monitors ProductVesa Fdmi wall Mounting Screen Adjustment options User MenusAuto Config Hdmi signal Sub SignalIR Receiver How to adjust the OSD On Screen Display screen How to adjust the screen automaticallyUse the remote control to adjust the OSD screen OSD MenuAdjusting Screen Color Picture ModeColor Temp Red / Green / BlueXGA Mode Auto-ConfigPhase Screen ResetAdjusting the Time function On / OFF TimerPower Saving Adjusting OSD image Display TimeSelecting the Utility UtilityAdjusting Utility Wait for IP Setup IP Setup CompletedTroubleshooting Maximum resolutionScreen image looks abnormal Screen color is abnormal Specifications 98.64 cm 38.83 inch x 29.94 cm 11.78 inch x 9.0 cm 3.54 inch On Mode DPM Mode SW-OFF Mode Green RedControlling the Multiple Product MonitorPower Power Input SelectUser-Red Adjust User-Green AdjustTransmission / Receiving Protocol PowerCommand a Input SelectCommand k bMain Picture InputInput SelectCommand x b Aspect RatioCommand k c Main picture formatBrightnessCommand k h OSD SelectCommand k lRemote/Key LockCommand k m Color TemperatureCommand k uColor Temperature User-Green AdjustCommand k w Color Temperature User-Blue AdjustCommand k $Abnomal stateCommand k z Auto ConfigurationCommand j uTimeCommand f a On Timer On/OffCommand f bOff Timer On/Off Command f c On Timer TimeCommand f dOff Timer TimeCommand f e Sleep TimeCommand f fAuto SleepCommand f g DPM SelectCommand f j ResetCommand f kPower savingCommand f Power Indicator Command f oPosition Command f q Position Command f rSerial No.Command f y 30. S/W VersionCommand f zConfiguration of frame Output waveformLead code Repeat code Bit description Frame interval TfA13 Model Serial