LG Electronics M2901S, M3801S Using the Remote Control, Name of the Remote Control Buttons

Using the Remote Control

Name of the Remote Control Buttons

• Power Button	• Input Button
Power On/Off
	Select Input Source
There is not a function	(RGB, HDMI)
which is supported

• Sleep Button

Select Sleep Time

• ARC button

Aspect Ratio Correction. Toggles through aspect ratio options.

• AUTO button

Automatic adjustment function (Operational for the analog signal only).

• PSM

There is not a function which is supported.

	• Key Button
There is not a function	There is not a function
which is supported	which is supported
• Menu Button	• Exit Button
OSD On/Off	Menu Exit
Sub OSD Menu out	• ▲ ▼ Buttons
	OSD Menu Navigation
	• ◄ ► Buttons
	Select/ Adjust OSD Menu Item
	• SET
	Select OSD Menu Item
There is not a function	Show input resolution information
which is supported	There is not a function
	which is supported

Inserting batteries into remote control.

	1.	Open the battery compartment cover on the back side and
		install the batteries matching correct polarity (+ with +,- with -)
	2.	Install two 1.5 V AAA batteries. Don’t mix old or used batteries
		with new ones.
AAA Type	3.	Close cover.
	4. To remove the batteries, perform the installation actions in

reverse.

4