LG Electronics 55WS10, 42WS10, 47WS10 owner manual Mounting on a wall

Page 11

ASSEMBLING AND PREPARING 11

Mounting on a wall

CAUTION

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor using the wall mounting interface (optional parts), attach it carefully so it will not fall.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

yyDisconnect the power before installing or moving the monitor. Otherwise electric shock may occur.

yyIf you install the Monitor on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor and void your warranty.

yyUse screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

ENGLISH

yy785mm(31 inch) or greater

*Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Monitor Signage Contents English Licenses Assembling and Preparing AccessoriesRemote control and Batteries Power Cord SP-2000 Cable holder Speaker Cable Tie Screws Optional AccessoriesST-200T Stand Screws Screen Marks Description Screen Buttons Screen Marks IR Receiver Power IndicatorParts and buttons Connection panelConnecting the Speakers Using the Mounting Cable TieUsing the Kensington security system Connecting the standPortrait Layout Mounting on a wall Number and Alphabet buttons Remote ControlVolume Up / Down A Button This button selection is not applicableViewing from any menu Selects the Tile ModeNavigation buttons Scrolls through menus or Returns to MonitorConnecting to a PC Using the MonitorRGB connection DVI-D connection Display Port connection Hdmi connectionCustomizing image options Adjusting the screenSelecting an image mode Customizing PC display options Adjusting the soundSelecting an sound mode Customizing sound options Using additional optionsAdjusting aspect ratio Just Scan Display Port Using the input listSelecting an input source ComponentEntertainment Connecting to a wired networkSelect IP Auto Setting or IP Manual Setting Close Return to the previous menu Tips for Network settingNetwork Status Ting the networkTips for using USB storage devices Connecting USB storage devicesBrowsing files Supported File Formats Viewing moviesEnergy Video options Tips for using playing video filesLanguage or Repeat Picture Size, Audio Language, SubtitleViewing photos Exit the Mark ModePhoto options Using photo optionsTransition Effect Option Sound Mode, Clear Voice II or Balance Listening to musicEnergy Saving button Control playback by using the following buttonsButton Description Viewing the Contents List DivX VOD Registration DivX VOD GuideDivX VOD Deregistration Using PIP/PBPSelect Movie List or Photo List from My MediaMovie List Accessing main menus Customizing SettingsPicture settings Picture Mode options Advanced Control To the lower frequency range Audio settingsSound Mode options Reset Resets the sound mode to the default settingMinutes Time settingsTo prevent overload Auto offOption settings Natural Setting Description Tile ModePC Position PC SizeInfo Portrait mode Setting Description Key LockProduct/Service Tile Mode Natural mode Tile ModeMode Displays videos or photos stored in the USB deviceOn a single monitor by dividing it into the main Sub screens. See p.37Network settings Camcorder/Camera Gaming device Making ConnectionsHD Receiver Not included Component connectionAvcvbs connection Connecting to a USBLAN connection Connecting to the LANComponent Daisy Chain MonitorsNo image is displayed TroubleshootingProblem Resolution After-image appears on the product Key Lock On message appearsScreen color is abnormal Audio function does not work42WS10 SpecificationsApplicable only for models that support the speakers Depth / Weight47WS10 Mm x 646.4 mm x 37.4 mm / 17.5 kg 55WS10 Mm x 752.4 mm x 37.8 mm / 21.8 kg Dimensions HDMI,DVI-D,Display Port PC supported mode RGB PC supported modeDTV Mode Code Hexa Function IR CodesCommunication Parameter Connecting the cableRS-232C Configurations Controlling the Multiple ProductData Command reference listVersion OK Acknowledgement Error AcknowledgementTransmission / Receiving protocol TransmissionReal data mapping English English To reduce the power consumption of the Monitor English Data Description 00 or Tile mode is off DataHex Mode English English Data1 Data2 Data3Cr English Hdmidtv A0 Hdmipc Model

55WS10, 47WS10, 42WS10 specifications

LG Electronics has been a pioneer in the technology sector, consistently pushing boundaries to deliver innovative solutions for consumers and businesses alike. Among its impressive range of digital signage solutions, the LG WS series stands out, specifically the models 55WS10, 47WS10, and 42WS10. These displays are designed to enhance visibility and engagement in various environments, making them ideal for retail, corporate, and educational settings.

The LG 55WS10 features a stunning 55-inch screen that utilizes LG’s advanced LED technology to produce vibrant colors and sharp images. With a resolution of 1920 x 1080 pixels, it ensures that content is displayed in Full HD quality. The high brightness level of 700 nits enables the display to remain clear and visible even in bright ambient light, making it an excellent choice for storefronts and other well-lit environments.

Similarly, the 47WS10 and 42WS10 models cater to different spatial requirements without compromising on performance. The 47WS10 boasts a 47-inch display, while the 42WS10 offers a slightly smaller 42-inch option. Both models also support Full HD resolution and high brightness levels, ensuring that they can deliver eye-catching visuals tailored to the needs of their specific installation scenarios.

One of the hallmark features of the WS series is the embedded webOS platform, which facilitates easy content management. Users can take advantage of this operating system to create, schedule, and manage content remotely, making it particularly useful for businesses seeking to deliver timely and relevant messaging. Additionally, the option for 24/7 operation ensures that these displays can handle prolonged use without any drop in performance.

The LG WS series also boasts sleek, stylish designs that allow for seamless integration into various environments, providing both functionality and aesthetic appeal. With a slim bezel and lightweight build, these displays can be easily mounted on walls or used with stands for flexibility in arrangement.

In terms of connectivity, the 55WS10, 47WS10, and 42WS10 models come equipped with multiple input options including HDMI, DVI-D, and USB ports, allowing for easy connection to various media sources and devices. This versatility makes them suitable for diverse applications, ranging from digital signage displays in malls to interactive presentations in boardrooms.

Overall, the LG Electronics WS series — with its robust features, cutting-edge technology, and flexible design — sets a new standard in digital signage. Whether it’s maximizing customer engagement or effectively communicating critical information, these displays enable businesses to deliver impactful visual experiences.
Top Page Image Contents