LG Electronics 55WS10, 42WS10, 47WS10 Network Status, Tips for Network setting, Ting the network

Page 23

ENTERTAINMENT 23

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is

required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to con- nect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NET- WORK and press OK.

3Press the Navigation buttons to select Net- work Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

 

Close

Return to the previous menu.

ENGLISH

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Monitor Signage Contents English Licenses Assembling and Preparing AccessoriesRemote control and Batteries Power Cord SP-2000 Cable holder Speaker Cable Tie Screws Optional AccessoriesST-200T Stand Screws Screen Marks Description Screen Buttons Screen Marks IR Receiver Power IndicatorParts and buttons Connection panelConnecting the Speakers Using the Mounting Cable TieUsing the Kensington security system Connecting the standPortrait Layout Mounting on a wall Number and Alphabet buttons Remote ControlVolume Up / Down A Button This button selection is not applicableViewing from any menu Selects the Tile ModeNavigation buttons Scrolls through menus or Returns to MonitorConnecting to a PC Using the MonitorRGB connection DVI-D connection Display Port connection Hdmi connectionCustomizing image options Adjusting the screenSelecting an image mode Customizing PC display options Adjusting the soundSelecting an sound mode Customizing sound options Using additional optionsAdjusting aspect ratio Just Scan Display Port Using the input listSelecting an input source ComponentEntertainment Connecting to a wired networkSelect IP Auto Setting or IP Manual Setting Close Return to the previous menu Tips for Network settingNetwork Status Ting the networkTips for using USB storage devices Connecting USB storage devicesBrowsing files Supported File Formats Viewing moviesEnergy Video options Tips for using playing video filesLanguage or Repeat Picture Size, Audio Language, SubtitleViewing photos Exit the Mark ModePhoto options Using photo optionsTransition Effect Option Sound Mode, Clear Voice II or Balance Listening to musicEnergy Saving button Control playback by using the following buttonsButton Description Viewing the Contents List DivX VOD Registration DivX VOD GuideDivX VOD Deregistration Using PIP/PBPSelect Movie List or Photo List from My MediaMovie List Accessing main menus Customizing SettingsPicture settings Picture Mode options Advanced Control To the lower frequency range Audio settingsSound Mode options Reset Resets the sound mode to the default settingMinutes Time settingsTo prevent overload Auto offOption settings Natural Setting Description Tile ModePC Position PC SizeInfo Portrait mode Setting Description Key LockProduct/Service Tile Mode Natural mode Tile ModeMode Displays videos or photos stored in the USB deviceOn a single monitor by dividing it into the main Sub screens. See p.37Network settings Camcorder/Camera Gaming device Making ConnectionsHD Receiver Not included Component connectionAvcvbs connection Connecting to a USBLAN connection Connecting to the LANComponent Daisy Chain MonitorsNo image is displayed TroubleshootingProblem Resolution After-image appears on the product Key Lock On message appearsScreen color is abnormal Audio function does not work42WS10 SpecificationsApplicable only for models that support the speakers Depth / Weight47WS10 Mm x 646.4 mm x 37.4 mm / 17.5 kg 55WS10 Mm x 752.4 mm x 37.8 mm / 21.8 kg Dimensions HDMI,DVI-D,Display Port PC supported mode RGB PC supported modeDTV Mode Code Hexa Function IR CodesCommunication Parameter Connecting the cableRS-232C Configurations Controlling the Multiple ProductData Command reference listVersion OK Acknowledgement Error AcknowledgementTransmission / Receiving protocol TransmissionReal data mapping English English To reduce the power consumption of the Monitor English Data Description 00 or Tile mode is off DataHex Mode English English Data1 Data2 Data3Cr English Hdmidtv A0 Hdmipc Model

55WS10, 47WS10, 42WS10 specifications

LG Electronics has been a pioneer in the technology sector, consistently pushing boundaries to deliver innovative solutions for consumers and businesses alike. Among its impressive range of digital signage solutions, the LG WS series stands out, specifically the models 55WS10, 47WS10, and 42WS10. These displays are designed to enhance visibility and engagement in various environments, making them ideal for retail, corporate, and educational settings.

The LG 55WS10 features a stunning 55-inch screen that utilizes LG’s advanced LED technology to produce vibrant colors and sharp images. With a resolution of 1920 x 1080 pixels, it ensures that content is displayed in Full HD quality. The high brightness level of 700 nits enables the display to remain clear and visible even in bright ambient light, making it an excellent choice for storefronts and other well-lit environments.

Similarly, the 47WS10 and 42WS10 models cater to different spatial requirements without compromising on performance. The 47WS10 boasts a 47-inch display, while the 42WS10 offers a slightly smaller 42-inch option. Both models also support Full HD resolution and high brightness levels, ensuring that they can deliver eye-catching visuals tailored to the needs of their specific installation scenarios.

One of the hallmark features of the WS series is the embedded webOS platform, which facilitates easy content management. Users can take advantage of this operating system to create, schedule, and manage content remotely, making it particularly useful for businesses seeking to deliver timely and relevant messaging. Additionally, the option for 24/7 operation ensures that these displays can handle prolonged use without any drop in performance.

The LG WS series also boasts sleek, stylish designs that allow for seamless integration into various environments, providing both functionality and aesthetic appeal. With a slim bezel and lightweight build, these displays can be easily mounted on walls or used with stands for flexibility in arrangement.

In terms of connectivity, the 55WS10, 47WS10, and 42WS10 models come equipped with multiple input options including HDMI, DVI-D, and USB ports, allowing for easy connection to various media sources and devices. This versatility makes them suitable for diverse applications, ranging from digital signage displays in malls to interactive presentations in boardrooms.

Overall, the LG Electronics WS series — with its robust features, cutting-edge technology, and flexible design — sets a new standard in digital signage. Whether it’s maximizing customer engagement or effectively communicating critical information, these displays enable businesses to deliver impactful visual experiences.
Top Page Image Contents