USING THE MONITOR SET 11
CAUTION | Self Image Setting Function | |
Press the power button on the front panel to turn | ||
| ||
| the power on. When monitor power is | |
yyConnect the signal | turned on, the 'Self Image Setting Function' is | |
executed automatically. (Only Analog Mode) | ||
input cable and tighten | ||
| ||
it by turning the screws |
| |
clockwise. |
| |
yyDo not press the screen with your finger for |
| |
a long time as this may result in temporary |
| |
distortion on the screen. |
| |
yyAvoid displaying a fixed image on the |
| |
screen for a long period of time to prevent |
| |
image burn. Use a screensaver if possible. |
|
ENGLISH
NOTE
yyThis is a simplified representation of the rear view.
yyThis rear view represents a general model; your display may differ from the view as shown.
yyIf you turn the Monitor set on when the set becomes cold, the screen may flicker. This is normal.
yySome red, green, or blue spots may appear on the screen. This is normal.
NOTE
yy‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only Analog Mode)
yy‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.(Only Analog Mode)