LG Electronics D2342P owner manual Customizing settings, Mnue settings

CUSTOMIZING SETTINGS 13

Customizing settings

Mnue settings

1Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu.

2Press the MENU button to display the options in the OSD menu.

3Set the options by pressing the buttons on the front of the Monitor set.

4Select EXIT to leave the OSD menu.

To return to the upper menu or set other menu items, use the up arrow ( ) button

The available Programme settings are described in the following:

MENU

BRIGHTNESS			100
ORIGINAL RATIO	WIDE
COLOR TEMP	PRESET
PRESET	WARM
RED			50
GREEN			50
BLUE			50
CONTRAST			70
BLACK LEVEL	HIGH
LANGUAGE	ENGLISH
SUPERENEYGYSAVING
FACTORY RESET	NO
		EXIT

ENGLISH

Menu	Analog	Digital	HDMI	Description
BRIGHTNESS	●	●	●	To adjust the brightnesTo adjust the brightness of the screen.s of
				the screen.
ORIGINAL RATIO				WIDE
				Switch to full screen mode according to input image signal.
	●	●	●	ORIGINAL
				XXXXX
				* XXXXXX
COLOR TEMP				PRESET
				Select the screen color.
				yy WARM: Set the screen to warm color temperature .
				yy MEDIUM: Set the screen to medium color temperature.
	●	●	●	yy COOL: Set the screen to cool color temperature.
				USER
				yy RED: Set your own red color levels.
				yy GREEN: Set your own green color levels.
				yy BLUE: Set your own blue color levels.
CONTRAST	●	●	●	To adjust the contrast of the screen.
BLACK LEVEL				You can set the offset level. If you select 'HIGH', the screen will be
(Only HDMI mode)				bright and if you select ‘LOW’, the screen will be dark.
			●	yy Offset
				As the criteria for video signal, it is the darkest screen the
				monitor can show.
LANGUAGE	●	●	●	To choose the language in which the control names are displayed.
SUPER ENEYGY	●	●	●	Sets the SUPER ENERGY SAVING function.
SAVING
FACTORY	●	●	●	The first screen of the Monitor set at the time of purchase to return
				to the state. However, the language menu is not initialized.

yyAnalog: D-SUB(Analog signal) input.

yyDigital: DVI-D(Digital signal) input.

yyHDMI: HDMI(Digital signal) input.v