6ASSEMBLING AND PREPARING
ENGLISH
Setting up the Monitor set
Attaching the Stand Base
1Place the Monitor set with the screen side down on a flat and cushioned surface.
Detaching the Stand Base and Body
1Place the Monitor set with the screen side down on a flat and cushioned surface.
2Turn the screw to the left, and then pull out the Stand Base from the Stand Body.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
2Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it “click”.
Hinge Body
Stand Body
3Attach the Stand Base from the set by turning the screw to the right with a Coin.
Stand Base
3Pull out the Stand Body from the Monitor set.
CAUTION
yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.