14ASSEMBLING AND PREPARING
ENGLISH
55LV35A
1Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets (2 x 2 tiling)
2After joining the sets, use the tiling guide to adjust the gap between the sets.
3Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
yyThe load applied to each set should be supported by the wall mount plate or the wall using a VESA wall mount (600 x 400).
yyThe load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Each set must be firmly mounted to the wall mount plate or the wall.)
yyYou may mount the set without using the tiling guide; this does not affect the performance of the device.
yyLoosen the screws on the set to install the tiling guides. (The screws are enclosed with the other components in the box, including the tiling guides.)