8ASSEMBLING AND PREPARING
ENGLISH
Installing on a Wall
To install the Monitor on a wall (optional), use the VESA screws provided as accessories to fasten it.
10 cm
20 cm
10 cm | 10 cm |
10 cm
IInstall the monitor at least 10 cm away from the wall and leave about 20 cm of space at each side of the monitor to ensure sufficient ventilation. Use the wall mount plate and screws that comply with the VESA standard.
CAUTION
yyDisconnect the power cord first, and then move or install the monitor set. Otherwise electric shock may occur.
yyIf you install the monitor set on a ceiling or slanted wall, it may fall and result in severe injury.
yyDo not over tighten the screws as this may cause damage to the monitor set and void your warranty.
yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
yyTo prevent injury, this apparatus must be securely attached to the wall in accordance with the instrallation instructions. (This pertains to Australia and New Zealand only.)
NOTE
Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. If there is no other option but to mount the product on the wall, make sure that sufficient ventilation is provided before installation.
-Failure to do so may result in a fire due to the increase in the internal temperature.