LG Electronics L15V26D Auto Programming Finding/Erasing Channels, Channel Search Auto Programming

Auto Programming: Finding/Erasing Channels

-For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider.

Channel Search (Auto Programming)

1	Press the a.prog button on the remote			2	Press the a.prog or volume (F, G)
	control.				buttons to begin the channel search.
					● Wait for auto program to complete the
					channel search cycle before choosing a
					channel. The TV scans for over-the-air
					channels and then channels provided by a
					cable service.
					Channel number being
		Auto program	F G
					memorized is displayed.

BASIC FEATURES

Auto program TV 63

34%

Stop : A

-When the channel search is complete, use the channel (D,E) buttons to review the memorized channels.

-If you press the enter (A) button during auto programming, the function will stop and only chan- nels found and programmed up to that time will remain in memory.

-Auto programming function can memorize only the channels which are being received at that time (some stations have limited broadcast hours).

25