APW Wyott AT/BT Series, M Series manual Specifications, Installation

M-83, M-83-D & M-91 & M-95

SPECIFICATIONS:

PLEASE READ PAGE 2 - “GENERAL INFORMATION”, BEFORE YOU CONTINUE.

Electrical Information - All Models

Each unit is equipped with a 4 foot (122cm), 3 wire grounded power supply cord which terminates with a 3 prong plug. The 120V units have a NEMA 5-15P plug. The 208/240V units have a NEMA 6-20 plug.

NOTE: Units rated 120V for installation in Canada have a NEMA 5-20P plug.

Model	Stock	Dimensions*	Electrical	Productivity		Weight
Number	Number			Halves/Hour		Net/Ship
	83501		120V-1600W-13.3A	Up to 1600
M-83	83502	20"H x 24 5/8"W x 12"D	208V-1600W-7.7A	“	“	83/93 Ibs
	83504	50.8 cm x 62.6 cm x 30.5 cm	230V-1470W-6.4A-50Hz	“	“	37.7/42.2 kg
			240V-1600W-6.7A
	84578		120V-1600W-13.3A	Up to 1600
M-830	84579	20"H x 24 5/8''W x 12"D	208V-1600W-7.7A	“	“	83/93 Ibs
	84590	50.8 cm x 62.6 cm x 30.5 cm	230V-1470W-6.4A-50Hz	“	“	37.7/42.2 kg
			240V-1600W-6.7A
	M952AA001		120V-1800W-15A
M-95-2	M952CA001	30 1/2"H x 21 1/2"W x 17 1/2"D	208V-2780W-13.4A			681bs.
	M952EA001	77.5 cm x 54.7 cm x 44.5 cm	230V-2550W-11.1 A-50Hz			30.9 kg
			240V-2780W-11.6A
	M953AA001		120V-1800W-15A
M-95-3	M953CA001	30 1/2"H x 24 1/2"W x 17 1/2"D	208V-2780W-13.4A			77lbs.
	M953EA001	77.5 cm x 62.3 cm x 44.5 cm	230V-2550W, 11.1 A-50Hz			35 kg
			240V-2780W-11.6A

*With Superfeeder: M-83 & M-83D - add 11” (28cm) to height, 4 1/2” (11.5cm) to depth.

INSTALLATION

1.UNPACK UNIT

a)Remove unit from shipping carton, unwrap loose parts and remove any packing tape,

plastic wrap and nylon tie-down.

b)Refer to the illustrations below and account for the following parts:

Part M-83 M83-D M-91 M-95

Legs (Item 1)	wrapped, internal package
Butter Roller (Item 2)	plastic wrapped, shipped in place
Butter Pan (Item 3)	plastic wrapped, shipped in place
Conveyor (Item 5)	boxed, external package.
Bun Chute Feeder (Item 7)	shipped in box with Conveyor
Instruction Manual	wrapped, internal package
Teflon Sheet Kit (optional)	wrapped, internal , package

wrapped, internal package

-

-

boxed, external package shipped in box with Conveyor wrapped, internal package wrapped, internal package

wrapped, internal package	wrapped, internal package
plastic wrapped, shipped in place	-
plastic wrapped, shipped in place	-
strapped in place with nylon tie	-
wrapped, internal package	wrapped, internal package
wrapped, internal package	wrapped, internal package
wrapped, internal package	-

NOTE: Prior to initial start-up, all removable parts and the grill surface should be cleaned with warm, soapy water to remove manufacturing oils, then rinsed and dried thoroughly. Apply oil to the conveyor chain after washing. Also the grill surface should be seasoned with a light coating of oil (fry oil works well) and pre- heated for 15 - 20 minutes.

3