Table of Contents / Setup Information
Table of Contents
Safety Warnings | . . | 2 | Cable TV STB Receiver & HCS6600 |
|
Important Safety Instructions | − | 4 | Initialization & Setup Connections . . | . . . . . . . 10 |
3 | System Setup | . . . . .11−12 | ||
Table of Contents / Setup Information | . . | 5 | ||
HCS6600 Product Description | . . | 6 | Configuration Options | . . . . 13−15 |
Transcoder Product Description | . . | 7 | Troubleshooting | . . . . . . . 16 |
Card Description | . . | 8 | Specifications | . . . . . . . 17 |
Installing CodePlus Transcoder Cards | . . | 9 | Document Revision History / Notes | . . . . . . . 18 |
|
|
| Warranty | Back Cover |
|
|
|
|
|
Setup Information
This document provides installation and setup support only for an HCS6600 transcoder card. Cable TV service and a Cable TV STB receiver must be installed and operating before you can proceed to set up the HCS6600. LG recommends that the system be professionally installed.
Check the items listed below before you begin the HCS6600 installation and setup procedures.
Cable
__ Refer to the documentation provided with the Cable TV STB, and carefully follow the sys- tem setup procedures. (The Cable TV STB receiver provides the
__ Authorization is required for HD channels. Contact your local Cable TV provider to get subscription programming authorization for the Cable TV STB receiver.
ASI Output (Optional)
__ If applicable, install the DTV modulator and upconverter that will receive the ASI output signal from the HCS6600. Refer to the man- ufacturer's documentation.
HCS6600
__ If the HCS6600 will be used with a unique feature card (Example: HCS6300) in the card frame CONTROLLER slot, you will also need a copy of the Installation & Setup Guide for the feature card in order to com- plete the HCS6600 system setup.
__ For HCS6600 Service Port connections, you must use an FTDI
5 |