Installing CodePlus Transcoder Cards
|
|
|
|
|
| Slots |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3 & 4 |
|
| CONTROLLER |
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| Slot |
|
|
|
|
|
|
|
|
|
|
|
|
| Slot 1 | Slot 2 | HCS6600 | Slot 5 | Slot 6 |
|
| Slot 7 |
| Slot 8 | Slot 9 | Slot 10 | Slot 11 | Slot 12 | ||||||||
HCS6600 | HCS6600 |
|
|
|
| HCS6600 | HCS6300 | HCS6600 | HCS6600 | HCS6600 | HCS6600 | HCS6600 | HCS6600 | |||||||||
|
|
|
|
|
| SERVICE |
|
|
| ETHERNET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PORT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| SERVICE |
| SERVICE |
|
|
|
| SERVICE |
|
| SERVICE |
| SERVICE |
| SERVICE |
| SERVICE |
| SERVICE |
| SERVICE | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| PORT |
| PORT |
|
| RESET |
|
| PORT |
|
| PORT |
| PORT |
| PORT |
| PORT |
| PORT |
| PORT |
| RESET |
| RESET |
|
|
|
| RESET |
|
| RESET |
| RESET |
| RESET |
| RESET |
| RESET |
| RESET | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| STATUS |
| STATUS |
|
| STATUS |
|
| STATUS |
|
| STATUS |
| STATUS |
| STATUS |
| STATUS |
| STATUS |
| STATUS |
I | 1 | I | 1 | I | 1 |
|
| I | 1 | SERVICE | I | 1 | I | 1 | I | 1 | I | 1 | I | 1 | I | 1 |
3 | 3 |
|
| 3 | 3 | 3 | 3 | 3 | 3 | 3 | ||||||||||||
E | 9 | E | 9 | 3 | 10 |
| E | 9 | PORT | E | 9 | E | 9 | E | 9 | E | 9 | E | 9 | E | 9 | |
E | E | E |
| E |
| E | E | E | E | E | E | |||||||||||
E | 4 | E | 4 | 9 |
| E | 4 | RESET | E | 4 | E | 4 | E | 4 | E | 4 | E | 4 | E | 4 | ||
| B |
| B | E |
|
|
| B |
| B |
| B |
| B |
| B |
| B |
| B | ||
I | 1 | I | 1 | E | 4 |
|
| I | 1 | STATUS | I | 1 | I | 1 | I | 1 | I | 1 | I | 1 | I | 1 |
E 3 | E 3 |
| B |
|
| E 3 |
| E 3 | E 3 | E 3 | E 3 | E 3 | E 3 | |||||||||
E 9 | E 9 |
|
|
|
| E 9 |
| E 9 | E 9 | E 9 | E 9 | E 9 | E 9 | |||||||||
E 4 | E 4 | I | 1 |
|
| E 4 | RF OUT | E 4 | E 4 | E 4 | E 4 | E 4 | E 4 | |||||||||
| A |
| A |
|
|
| A |
| A |
| A |
| A |
| A |
| A |
| A | |||
|
|
|
| E 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| E 9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| E 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| ASI OUT |
| ASI OUT |
| A |
|
|
| ASI OUT |
|
| ASI OUT |
| ASI OUT |
| ASI OUT |
| ASI OUT |
| ASI OUT |
| ASI OUT |
ASI OUT
CONTROLLER Slot
The card in this slot may vary depending on system features.
Note: All cards used in the card frame must be inserted and removed by
qualified service personnel only.
Note: Use extreme care when handling an HCS6600 card. Always observe proper
precautions with respect to static electric- ity and mechanical shock. When not installed in a card frame, return the HCS6600 card to the
Note: The CodePlus series products are NOT designed to be
Power must be removed to the card frame before any CodePlus transcoder cards are inserted or removed.
Note: The card slots in the card frame are NOT all identical!!! An HCS6600 card can only be installed in Slots 1 to 6 and
7 to 12. The CONTROLLER slot between Slots
6 and 7 is dedicated for optional feature cards and is not compatible with HCS6600 cards.
Note: When installing cards, remove
blank cover plates and insert new cards as applicable. For ports that will not be
used, leave the blank cover plates in place for proper ventilation and FCC and safety agency compliance.
1.Unpack the HCS6600 unit(s) and all accessories. Accessories provided:
2.Select the slot(s) in the card frame in which to install the HCS6600. Note: All cards must be used in an
3.Remove the AC power cord for the card frame from the power outlet.
4.Remove the blank cover plate from each slot into which a card is to be inserted.
5.Without using force, slide each new card into its designated slot, and ensure that it is fully inserted.
6.Engage and tighten the top and bottom thumbscrews securely. Note that the thumb- screws should only be finger tight; overtighten- ing may damage the assembly.
7.Refer to the diagram on page 10 for cable connections, and complete the system instal- lation and test procedure on page 11.
9 |