Installation of the Closed Position Stops
The GTO/PRO Gate Openers firmly hold the gates in the closed position using positive stops. The positive stops help stabilize the gate leaves in the closed position. To further enhance stability and security, we strongly recommended using an optional GTO/PRO Automatic Gate Lock (see Accessory Catalog) with your dual gate.
IMPORTANT: You need to determine which side of the driveway you will mount the control box. From this point on the gate and gate opener on the same side as the control box will be referred to as the MASTER gate and gate opener. The gate and gate opener on the opposite side of the driveway from the control box will be referred to as the SLAVE gate and gate opener.
|
|
|
|
|
|
| Gate Hinge | Optional Ground Stop | Gate Hinge | ||||
|
|
|
|
|
|
|
| (beneath gate) | |||||
|
|
|
|
|
|
|
| MASTER GATE |
|
|
| SLAVE GATE | |
|
|
|
|
|
|
|
|
| Closed Position |
|
| ||
| CONTROL BOX |
| Stop Plates |
|
| ||||||||
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
| The gate leaf can open |
|
|
| The gate leaf can open | ||
|
|
|
|
|
|
| up to 110˚ (max.) |
|
|
| up to 110˚ (max.) |
Step 1
Attach the horizontal closed position stop plate to the MASTER gate leaf.
Closed Position Stop Plate mounted horizontally on metal post with
Detach the gate operators from the gates and move the gates to their closed position (Illustration A). Using appropriate hardware for your type of gate
FRONT VIEW
MASTER Gate Frame
SLAVE Gate Frame
Illustration B | TOP VIEW |
|
NOTE: The optional ground stop post is used to provide a secure point for the SLAVE gate to close against. If you will be using the GTO/PRO Horizontal Gate Lock accessory with your gate opener system, the closed position ground stop is REQUIRED, as shown in Steps 2 and 3 on the next page.
17