GTO 2502 Dual Gate DIP Switch Settings Dual Modes, DIP Switches #1 and #2 Factory Set OFF/OFF

Dual Gate DIP Switch Settings (DUAL MODES)

DIP Switches #1 and #2 (Factory Set OFF/OFF)

The combination of DIP Switches #1 and #2 will determine the sequence dual gates will open and close.

DIP Switch #3 - Additional Delay (Factory Set OFF)

To add 4 seconds to the standard 4 seconds, a total of 8 seconds delay, sequence delay switch to ON.

DIP Switch #4 - Used to set MASTER and SLAVE gate closed position limits (next section).

#4 ON = when setting closed limit for SLAVE gate. #4 OFF = when setting closed limit for MASTER gate.

	1 ON
	2
	3
	4
	5
6	6
7	7
OFF	ON

		DUAL MODES
	1	1 ON
SET LIMIT	2	2
	3	3
	4	4
	OFF	ON

#1 OFF & #2 OFF	DUAL	1	2	3	4	ON
		ON
	MODES
		1	2	3	4 OFF

Factory setting.	Set Limit Button
Single Arm (Master	Dual Mode DIP Switches
Only) operation.

#1 ON , #2 OFF	DUAL	1	2	3	4	ON
		ON
and #3 OFF	MODES
		1	2	3	4	OFF
#1 ON, #2 OFF	DUAL	1	2	3	4	ON
		ON
and #3 ON *	MODES
		1	2	3	4
						OFF
#1 OFF, #2 ON	MODES	1	2	3	4	ON
		ON
	DUAL
and #3 OFF
		1	2	3	4	OFF
#1 OFF, #2 ON	DUAL	1	2	3	4	ON
		ON
and #3 ON	MODES
		1	2	3	4
						OFF

MASTER gate starts to open 2 seconds before SLAVE gate / SLAVE gate starts to close 4 seconds before MASTER gate.

MASTER gate starts to open 2 seconds before SLAVE gate / SLAVE gate starts to close 8 seconds before MASTER gate.

MASTER and SLAVE gates open simultaneously / SLAVE gate starts to close 4 seconds before MASTER gate.

MASTER and SLAVE gates open simultaneously / SLAVE gate starts to close 8 seconds before MASTER gate.

*REQUIRED SETTING for use with an Automatic Gate Lock accessory.

DUAL	1	2	3	4	ON	#4 OFF to set or CLEAR
	ON
MODES						MASTER Position Limit
	1	2	3	4
					OFF

1 2 3 4

DUAL ON

MODES

1 2 3 4

ON	#4 ON to set or CLEAR
	SLAVE Position Limit
OFF

25