A20

Specifications	W2042SM

Display	20.1 inches (51.11 cm) Flat Panel Active matrix-TFT LCD
	Anti-Glare coating
	20.1 inches viewable
	0.258*0.258 mm pixel pitch

Sync Input	Horizontal Freq.		28 - 83 kHz (Automatic)
	Vertical Freq.		56 - 75 Hz (Automatic)
	Input Form		Separate TTL, Positive/Negative
			SOG (Sync On Green)
Video Input	Signal Input		15 pin D-Sub Connector
	Input Form		RGB Analog (0.7 Vp-p/ 75 ohm)

Resolution	Max		VESA 1680 x 1050 @60 Hz
	Recommend		VESA 1680 x 1050 @60 Hz

Plug&Play	DDC 2AB
Power	On Mode		:	42W(Typ.)
Consumption	Sleep Mode		≤	1 W
	Off Mode		≤	1 W

Dimensions		With Stand			Without Stand
& Weight	Width	47.39 cm / 18.66 inches			47.39 cm / 18.66 inches
	Height	39.04 cm / 15.37 inches			31.89 cm / 12.56 inches
	Depth	19.84 cm /		7.81 inches	6.29 cm / 2.48 inches

	Net		4.5 kg (10 lbs)

Tilt Range	Tilt		-5˚~ 20˚
Power Input	AC 100-240V~ 50/60Hz 1.0A
Environmental	Operating Conditions
Conditions	Temperature		10˚C to 35 ˚C
	Humidity		10 % to 80 % non-Condensing

	Storage Conditions
	Temperature		-20˚C to 60 ˚C
	Humidity		5 % to 90 % non-Condensing
Stand Base	Attached ( ), Detached ( O )
Power cord	Wall-outlet type or PC-outlet type

NOTE

Information in this document is subject to change without notice.