LG Electronics W1942SM, W2042SM, W2242SM manual Screen blinks, Screen color is mono or abnormal

Page 19

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Have you installed the display driver?

●Have you installed the display driver?

●Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

•Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com.

•Make sure to check if the video card supports Plug&Play function.

A18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents W1942SM W2042SM W2242SM On Safety Important PrecautionsOn Disposal On InstallationOn Cleaning On RepackingConnecting the stand Connecting the DisplayDisassembling the stand Ergonomic Positioning your displayMac adapter Using the ComputerMenu Button Control Panel FunctionsFront Panel Controls ControlPower Indicator VolumeAuto Image Adjustment Power ButtonScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub-menu Reference On Screen DisplayOSD Selection and AdjustmentIcons Brightness Contrast Gamma Preset RED GreenBlue Sharpness PhaseClock SETOSD PowerIndicator Reset LanguageUser User MovieIs the power cord of the display connected? TroubleshootingDo you see OSD Locked when you push Menu button? Display image is incorrect Screen color is mono or abnormal Screen blinksSpecifications A20 A21 Preset Modes Resolution SpecificationsIndicator Wall mount plateSeparate purchase Installing the Wall mount plateKensington Security Slot Digitally yours
Top Page Image Contents