LG Electronics W2252TG, W1952TG manual On Installation, On Cleaning, On Repacking, On Disposal

Page 3

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of your local authority.

A2

Image 3
Contents W1952TG W2252TG On Safety Important PrecautionsOn Disposal On InstallationOn Cleaning On RepackingConnecting the stand Connecting the DisplayDisassembling the stand Tilt Range -5˚~20˚ Ergonomic Positioning your displayPC-outlet type Using the ComputerControl Panel Functions Front Panel ControlsOSD LOCKED/UNLOCKED Button For more information, refer to page A17 Auto Image AdjustmentScreen Adjustment On Screen Display OSD Control AdjustmentTracking Clock On Screen DisplayOSD Selection and AdjustmentIcons Green PresetBrightness Contrast Gamma REDTracking Clock PhasePosition Power IndicatorReset Language OSDWide EZ ZoomingSound Photo EffectUser User MovieNo image appears TroubleshootingDisplay image is incorrect Have you installed the display driver? Display Specifications W1952TGSpecifications W2252TG Preset Modes Resolution SpecificationsDigitally yours