Install Menu

Menu Background

Press “” or “” button to select Menu Background. You can set menu background level by pressing “

”or “” button.

Power Save Mode

Use “” or “” button to select Power Save Mode.

Press “ ” or “” button to set Power Save Mode as On or Off.

See the section, “Environmental Information” in this manual for further information on Power Save Mode.

Note : Backlight function will be invisible if Power Save Mode is set to on.

Backlight

This setting controls the backlight level. Select Backlight by pressing “” or “” button. Press“

”or “” button to set Backlight to Auto, Medium, Maximum or Minimum.

Menu Timeout

To set a specific display timeout for menu screens, set a value for this option.

Press “” or “” button to select Menu Timeout. Use “” or “” button to change menu timeout to 15 sec, 30 sec or 60 sec.

Teletext Language

Press “” or “” button to select Teletext Language. Use “” or “” button to change Teletext Language to West, East, Turk/Gre, Cyrillic, Arabic or Persian.

HDMI PC Full Mode (optional)

If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be On to adjust the screen ratio correctly. This item might be inactive in some resolutions.

Note: If you connect an HDMI device and switch the TV to HDMI mode, this feature will be visible (except for 1080i/1080P resolution).

Full Mode (optional)

If you connect a device via HDMI or YPbPr connectors and set 1080i/1080P resolutions, Full Mode item will be visible.You can set Full Mode as 1:1 or Normal by using “”or “”.If you select 1:1, screen ratio will be adjusted correctly. If you set Normal, screen ratio may expand.

Ext Out

Press “” or “” button to select Ext Out. Use “” or “” button to set the Ext Out as On or Off.

Note:

For copying from a DVD or VCR device, you should choose desired source from source menu and turn “On” to EXT Out from feature menu.

Ext Out should be On in order to use Timers function in the DTV mode.

Programme

Press “” or “” button to select Programme. Use “” or “” button to select the programme number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199.

Band

Band can be selected either C or S. Press “” or “

”button to set Band.

Channel

Channel can be changed by “” or “” button or numeric buttons.

Colour System

Press “” or “” button to select Colour System. Use “” or “” button to change the colour system to PAL, PAL 60, SECAM or AUTO.

Sound System

Press “” or “” button to select Sound System. Press “” or “” button to change the sound system to BG,DK, I, L or L’.

Fine Tune

Press “” or “” button to select Fine Tune. Press “

” or “” button to adjust the tuning.

Search

Press “” or “” button to select Search. Use “” or “” button to start programme searching. You can also enter the desired frequency using the numeric buttons while Search item is highlighted.