Install Menu in AV Modes
The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu.
Colour System
Press “
” or “
” button to select Colour System. Use “
” or “
” button to change the colour system to PAL, SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press “
” or “
” button to select Store Programme. Press “
” or “OK” button to store the settings. “Stored...” will be displayed on the screen.
Programme Table
Select Programme Table by pressing “
” or “
” button. Press “
” to display Programme Table:
By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the AV modes). By cursor action, programme selection is done automatically.
Name
To change the name of a programme, select the programme and press the RED button.
The first letter of the selected name will be highlighted. Press “
” or “
” button to change that letter and “
” or “
” button to select the other letters. By pressing the RED button, you can store the name.
Move
Select the programme which you want to move by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again.
Delete
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting automatic tuning, Auto Programming System menu will appear on the screen:
Press “
” or “
” button to select your country. If you want to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting automatic tuning, all stored programmes will be erased and the TV will search for available channels. During the search, the following On Screen Display (OSD) will be displayed:
Whenever you press the BLUE button, APS function stops and Programme Table appears on the screen.
If you wait until the end of APS, Programme Table will be displayed with the programmes found and located.
English - 22 -
