Technika 32-2010 manual PC Mode Menu System, Source Menu, PC Position Menu

Source Menu

Press “” or “” button and select the sixth icon. Then press “” or “OK” button. Source menu appears on the screen:

In source menu, highlight a source by pressing “” or “” button and switch to that mode by pressing “” button. Source options are; TV, DTV, EXT-1, FAV, HDMI-1,HDMI-2, YPbPr and PC-VGA.

Note: Once you have connected optional equipment systems to your TV, you should select the required input to view pictures from that source.

PC Mode Menu System

See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.

For switching to PC source, press “” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode.

Note that PC mode menu settings are available only while the TV is in PC source.

PC Position Menu

Select the first icon by pressing “ ” or “” button. PC Position menu appears on the screen:

Autoposition

If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture

into correct place automatically. This setting therefore automatically optimizes the display.

Select Autoposition item by using “” or “” buttons. Press “OK” or “”, “” button.

Warning: Please ensure auto adjustment is performed with a full screen image to ensure best results.

H (Horizontal) Position

This item shifts the image horizontally to right hand side or left hand side of the screen.

Select H Position item by using “” or “” button. Use “” or “” button to adjust the value.

V (Vertical) Position

This item shifts the image vertically towards the top or bottom of the screen.

Select V Position item by using “” or “” button. Use “” or “” button to adjust the value.

Phase

Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

Select Phase item by using “” or “” buttons. Use “” or “” button to adjust the value.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Select Dot Clock item by using “” or “” buttons. Use “” or “” button to adjust the value.

PC Picture Menu

For adjusting PC picture items, do the following:

Press “” or “” button to select the second icon. PC Picture menu appears on the screen.

Brightness, Contrast, Colour and Colour Temperature settings in this menu are identical to settings defined in TV picture menu under “Analogue TV Menu System”.

Note: If you set Colour Temp as User, you can define R, G, B settings manually.

Sound,Feature and Source settings are identical to the settings explained in Analogue Tv menu system.

English - 23 -