LG Electronics N225WU Using the Monitor SET, Using Primary Station, SUB in connection PC

USING THE MONITOR SET 13

USING THE MONITOR SET

Using Primary Station

y yThis monitor supports the *Plug and Play feature.

*Plug and Play: A feature that allows you to add a device to your computer, without having to reconfigure anything or install any manual drivers.

D-SUB IN connection - PC

D-SUB IN transfers analog video signals from the PC to the monitor.

Connect the monitor to the PC using the provided 15-pin D-SUB signal cable as illustrated below.

Back of the product.

CAUTION

y yConnect the input signal cable and tighten in the

direction of the arrow. To prevent disconnection secure the cable tightly.

y yDo not press on the screen for a prolonged time. This may cause image distortion.

y yDo not display a still image on the screen for a prolonged time. This may cause image retention. If possible, use the screen saver.

NOTE

y yTo connect the monitor to a computer, use the appropriate signal cable (D-SUB).

y yA converter can be used to convert the DVI-I input signal to D-SUB input signal.

yyWhen connecting the power cord to the out- let, use a grounded (3-hole) multi-socket or a grounded wall outlet.

yyThe monitor may flicker when turned on in an area of low temperature. This is normal.

yySometimes red, green or blue spots may ap- pear on the screen. This is normal.

ENGLISH

RGB OUT

CAUTION

y yThe D-SUB OUT port is used to output the image signals inputted from the USB port. The D-SUB OUT port is not supported if the D-SUB IN port is being used.