ASSEMBLING AND PREPARING 7
Lifting and moving the Monitor set
When moving or lifting the Monitor set, read the following to prevent the Monitor set from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
y yAvoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.
y yIt is recommended to move the Monitor set in the box or packing material that the Monitor set originally came in.
y yBefore moving or lifting the Monitor set, disconnect the power cord and all cables.
y yHold the top and bottom of the Monitor set frame firmly. Make sure not to hold the transparent part.
Setting Up the Monitor set
Attaching the Stand Base
1Place the monitor's screen face down.
CAUTION
y yTo protect the screen from scratches, cover the surface with a soft cloth.
2Check the position (at the front and rear) of the stand body, then mount the stand base on the stand body as shown in the figure.
Stand Body
Stand Base
ENGLISH
y yWhen holding the Monitor set, the screen should face away from you to prevent the screen from scratches.
y yWhen transporting the Monitor set, do not expose the Monitor set to jolts or excessive vibration.
y yWhen transporting the Monitor set, keep the Monitor set upright, never turn the Monitor set on its side, or tilt towards the left or right.
3Using a coin, turn the screw clockwise to se- cure the stand base.