PAGE 22 — GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #2 (11/03/08)
2. Next, fold the protective cover (Figure 28) into itself and
zip.
ZIPPER
PROTECTIVE
COVER
Figure 28. Folding Protective Cover
Figure 27. Removing Balloon/AC Power Cord
Figure 29. Connecting Power Cables
Removing the Protective Covering (GB12BS)
1. Expose the balloon by pulling down on the velcro tab and
unzipping the protective cover as shown in Figure 27. Also
remove the AC power cord at this time.
Connecting Power Cable (GB12BS)
1. Connect 15 ft. (4.6 meters) AC power cable (Figure 29)
to the lamp power cable.
2. Attach both S-type hooks (Figure 30) on the AC power
cable into the cable support holes on the offset pole.
B
OFFSET
POLE
S-TYPE
HOOK
POWER
CABLE
GLOBUG GB12BW/BS/BP LIGHTING SYSTEM — SETUP (GB12BS)
Figure 30. Attachement of S-Hooks
VELCRO
TAB
PROTECTIVE
COVER
AC-POWER
CABLE