LG Electronics ME20CR owner manual Screw Turn the screw by using the screw handle

Page 7

Connecting the Display

5. Attach the monitor to the Stand Base by turning the screw to the right.

Screw : Turn the screw by using the screw handle.

6. Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you're attaching.

7. Take the screw out by turning to the left to separate the monitor and Stand Base.

IMPORTANT

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

6

Image 7

Contents LCD Monitor To Avoid Personal Injury Important PrecautionsOn Safety Do not Open the DisplayOn Installation On Repacking On CleaningThank you for selecting LGE products AccessoriesConnecting the stand base or Removing the stand base Connecting the DisplayScrew Turn the screw by using the screw handle Positioning your display Landscape & Portrait You can rotate the panel 90o clockwise Using the Pivot functionSignal cable Connect D-SUB Cable Connect DVI-D Cable Connecting with the PC equipmentFront Panel Controls Control Panel FunctionsOSD LOCKED/UNLOCKED Exit Button Screen Adjustment On Screen Display OSD Control AdjustmentPicture Color Display Others On Screen DisplayOSD Selection and AdjustmentButton Tip Menu Name Icons Sub- menusBrightness Contrast Sharpness Main menu Sub menu DescriptionBlue Color Temp PresetUser RED GreenHorizontal Vertical Clock Phase AutoLanguage PowerIndicator Reset LanguageMenu Name Sub- menus Normal Movie Internet Sub menu DescriptionDo you see a Check Signal Cable message on the screen? TroubleshootingOSD Unlocked will appear Display image is incorrect Screen blinks Have you installed the display driver?Specifications Indicator Preset Modes ResolutionWall mount plate Separate purchase Installing the Wall mount plateModel Serial