Installing the Wall mount plate

This monitor satisfies the specifications of the Wall mount plate or the interchange device.

Wall Mount pad

1. After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage.

2. Separate the head and the stand with the use of a screwdriver.

3. Install the Wall mount plate.

Wall mount plate (Separate purchase)

-Be sure to use screws and a wall mount that meet VESA standards.

-Using screws longer than those recommended might damage the product.

-Using screws that do not meet VESA standards might either damage the product or result in it coming away from the wall.We will not be held responsible for any damage resulting from failure to follow these instructions.

Kensington Security Slot

Connected to a locking cable that can be purchased separately at most computer stores.

<Screw Mounting Interface Dimension > Hole spacing : 100 mm x 100 mm

NOTE

VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications

Please use VESA standard as below.

*784.8 mm and under (30.9 inch)

-Wall Mount Pad Thickness : 2.6 mm

-Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm

*787.4 mm and above (31.0 inch)

-Please use VESA standard wall mount pad and screws.