LG Electronics ME20CR owner manual Screen blinks, Have you installed the display driver?

Page 24

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA

DDC) monitor found" message?

●Have you installed the display driver?

•Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com.

•Make sure to check if the video card supports Plug&Play function.

23

Image 24

Contents LCD Monitor Important Precautions On SafetyDo not Open the Display To Avoid Personal InjuryOn Installation On Cleaning On RepackingAccessories Thank you for selecting LGE productsConnecting the Display Connecting the stand base or Removing the stand baseScrew Turn the screw by using the screw handle Positioning your display Using the Pivot function Landscape & Portrait You can rotate the panel 90o clockwiseConnecting with the PC equipment Signal cable Connect D-SUB Cable Connect DVI-D CableControl Panel Functions Front Panel ControlsOSD LOCKED/UNLOCKED Exit Button On Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Picture Color Display OthersMenu Name Icons Sub- menus Button TipMain menu Sub menu Description Brightness Contrast SharpnessColor Temp Preset User REDGreen BluePhase Auto Horizontal Vertical ClockPower IndicatorReset Language LanguageMenu Name Sub- menus Sub menu Description Normal Movie InternetTroubleshooting Do you see a Check Signal Cable message on the screen?OSD Unlocked will appear Display image is incorrect Have you installed the display driver? Screen blinksSpecifications Preset Modes Resolution IndicatorInstalling the Wall mount plate Wall mount plate Separate purchaseModel Serial