If a Hoshizaki
thermostat extension bracket (stainless). Use the 2 screws to attach the "Z" bracket (plastic) to the thermostat extension bracket (stainless).
h. Use the two 4×10 stainless steel screws in the accessory bag to attach the thermostat bulb attachment (with attached thermostat bulb) to the "Z" bracket.
i. Remove the 2 screws from the lower part of the thermostat bracket (plastic) and use them to attach the thermostat extension bracket (stainless) to the thermostat bracket (plastic). See Fig. 5.
Thermostat Bracket (plastic)
Thermostat Bulb
Attachment (plastic)
Thermostat Extension
Bracket (stainless)
"Z" Bracket (plastic) | Fig. 5 |
7)Replace the panels and baffle in their correct positions (unless you are installing an upper unit). (See "E. Installation of Upper Unit").
Note: The bin control thermostat must be checked for proper operation at startup.
E. Installation of Upper Unit
1)See "II.D. Setup" for the lower unit installation.
2)Remove the top panel and the top
insulation of the lower unit. These pieces must be removed when installing an upper unit.
3)Unpack the upper unit, and remove the shipping carton, tape, and packing material.
4)Remove the panels of the upper unit.
5)Stack the upper unit on top of the lower unit.
6)Secure the upper unit to the lower unit using the 2 mounting brackets and the bolts provided. See Fig. 6.
7)Remove the thermostat bulb attachment (plastic) of the upper unit from the thermostat extension bracket (stainless).
Icemaker
(Upper Unit)
Mounting
Brackets
Bolts
Icemaker
(Lower Unit)
Bin
Fig. 6
17
