Attaching the product to a wall
*Applicable only for models that support the stand.
•Set it up close to the wall so the product doesn't fall over when it is pushed backwards.
The instructions shown below are a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled forward. It will prevent the product from falling forward and hurting people. It
will also prevent the product from damage caused by a fall. Please make sure that children don't climb on or hang from the product.
2 
1 
3 |
1.Use the braket and the bolt to fix the product to the wall as shown in the picture.
2.Secure the bracket with the bolt(not provided with product, purchase separately) on the wall.
3. Use a sturdy rope (not provided with the product, purchase separately) to tie the product. It is safer to tie the rope horizontaliy between the wall and the product.
Note
•When moving the product to anoher place, undo the ropes first.
•Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
•To use the product safely, make sure that the height of the braket that is mounted on the wall is same as that of the product.
18