Onkyo TX-NR636 manual Amplifier Section, Video Section, Tuner Section, Network Section, General

Page 18

Specifications

Amplifier Section

Rated Output Power All channels:

95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

115 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(North American)

7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others) Maximum Effective Output Power

7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian) Dynamic Power ()

¼¼IEC60268-Short-term maximum output power 240 W (3 Ω, Front)

210 W (4 Ω, Front)

120 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance (Unbalance)

200 mV/47 kΩ (LINE)

2.5mV/47 kΩ (PHONO MM)

Rated RCA Output Level and Impedance

200 mV/2.2 kΩ (LINE OUT)

Maximum RCA Output Level and Impedance

2 V/2.2 kΩ (LINE OUT)

Phono Overload

70 mV (MM 1 kHz 0.5% Direct) Frequency Response

5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode) Tone Control Characteristics

±10 dB, 20 Hz (BASS) ±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio 106 dB (LINE, IHF-A)

80 dB (PHONO MM, IHF-A) Speaker Impedance

6 Ω - 16 Ω (North American and Taiwanese)

4 Ω - 16 Ω (Others)

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component Y)

0.7Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, –3 dB

Tuner Section

FM Tuning Frequency Range

87.5MHz - 107.9 MHz (North American and Taiwanese)

87.5MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range 522/530 kHz - 1611/1710 kHz

Preset Channel 40

Network Section

Ethernet LAN 10BASE-T/100BASE-TX

Wireless LAN

IEEE 802.11 b/g/n standard (Wi-Fi®standard)

2.4 GHz band:

   1 - 11 ch (North American)

   10 - 11 ch (Spain)    10 - 13 ch (France)

   1 - 13 ch (Others)

 (Wi-Fi®standard)

Bluetooth Section

Communication system

Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate) Maximum communication range

Line of sight approx. 15 m () Frequency band

2.4GHz band (2.4000 GHz - 2.4835 GHz) Modulation method

FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles

A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs

SBC Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)

¼¼The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.

General

Power Supply

AC 120 V, 60 Hz (North American and Taiwanese)

AC 220 - 240 V, 50/60 Hz (Others)

Power Consumption

6.3A (North American and Taiwanese)

630 W (Others)

0.1W (Stand-by, North American and Taiwanese)

0.2W (Stand-by, Others) 80 W (No-sound)

Dimensions (W × H × D)

435 mm × 173.5 mm × 329 mm

17-1/8" × 6-13/16" × 12-15/16"

Weight

10.0kg (22.0 lbs.) (North American and Taiwanese)

10.5kg (23.1 lbs.) (Others)

HDMI

Input

IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4 (GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (front)

Output

OUT MAIN (ARC, HDCP2.2), OUT SUB Video Resolution

Pass through: 4K 60 Hz (YCbCr 4:2:0)

Upscaling: 4K 30 Hz Audio Format

DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM

Supported

3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD), 4K (Upscaling and Passthrough)

Video Inputs

Component

IN (CBL/SAT)

Composite

IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME)

Video Outputs

Component

OUT

Composite

MONITOR OUT

Audio Inputs

Digital

OPTICAL (TV/CD)

COAXIAL 1 (BD/DVD), 2 (CBL/SAT) Analog

BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO

Audio Outputs

Analog

ZONE2 LINE OUT

2 SUBWOOFER PRE OUT

Speaker Outputs

FRONT L/ R, CENTER, SURROUND L/R, BACK or HEIGHT L/R, ZONE2

L/R

Phones

PHONES (Front, ø 6.3)

Others

Setup Mic

1 (Front)

RI

1

USB

1 (Front)

Ethernet

1

Specifications and features are subject to change without notice.

18

Image 18
Contents TX-NR636  How to use the remote controller FeaturesSupplied Accessories About the Basic ManualConnecting the TV and players Hdmi cable connectionConnecting Components without Hdmi  Audio signal connection Video signal connection Connecting speakers Headphones connection Other connections AM/FM antenna connectionsNetwork connection Place the speaker setup microphone Turning the power onMaking the Initial Setup with the Setup Wizard  1st Step AccuEQ Room CalibrationFollow the guidance displayed on the TV screen  3rd Step Remote Mode Setup 2nd Step Source Connection Enabling Hdmi Linked Operation and Other FunctionsSetting button  Exiting the setup wizardSelect and set the authentication method  4th Step Network ConnectionAdjust the volume with F Remote controller parts nameSelect the desired listening mode Playing the player and TVListening to AM/FM Radio Listening modesOther useful functions Registering an AM/FM Radio StationPlaying sound of the Bluetooth-enabled device Connecting and playing the Bluetooth- enabled devicePairing Using the Home menu Audio Using Quick Setup menuPress Q Setup on the remote controller  Video Connecting speakers in another room Using the Zone functionConnecting with Player Performing Zone playbackFront Panel GND terminal The ground wire of the turntable is connected Rear Panel DisplayComposite video and analog audio jacks Analog  Resetting the unit Cannot access to networkBluetooth AV receiver turns off unexpectedlyVideo Section Bluetooth SectionAmplifier Section Tuner SectionPrecautions For European Models License and Trademark InformationDeclaration of Conformity China AmericasEurope Asia, Oceania, Middle East, Africa

TX-NR636 specifications

The Onkyo TX-NR636 is a remarkable A/V receiver that has garnered acclaim for its impressive array of features and technologies. Designed to meet the demands of home theater enthusiasts, this unit provides a wealth of options for connecting various audio and video devices, ensuring a captivating cinematic experience.

One of the standout features of the TX-NR636 is its multi-channel audio support. This receiver supports 7.2 channel surround sound, offering users the ability to create a comprehensive audio setup. With DTS-HD Master Audio and Dolby TrueHD support, the TX-NR636 delivers high-fidelity audio that enhances movie watching, music listening, and gaming experiences. The dynamic and immersive soundscapes created by these technologies transport users right into the heart of the action, making it a perfect addition to any home theater configuration.

Another key characteristic of the TX-NR636 is its robust connectivity options. The unit is equipped with eight HDMI inputs and two outputs, making it compatible with an array of devices, including Blu-ray players, gaming consoles, streaming devices, and more. This flexibility ensures that users can easily connect all of their electronics without hassle. Additionally, the receiver also includes legacy connectivity options such as composite and component video inputs, ensuring compatibility with older devices.

The TX-NR636 incorporates advanced networking features as well. This receiver is Wi-Fi capable, allowing users to stream audio from various online services, including Spotify, Pandora, and TuneIn. Additionally, it supports Apple AirPlay, providing iOS users with a seamless way to stream their music. With a built-in USB port, users can also connect their flash drives to play back high-resolution audio files, further expanding their listening options.

For a personalized listening experience, the TX-NR636 features Onkyo's AccuEQ room acoustic calibration technology. This innovative system measures speaker output and room acoustics to automatically adjust settings for optimal sound performance. Users can enjoy their favorite content with ideal sound quality tailored to their unique environment.

In summary, the Onkyo TX-NR636 A/V receiver stands out with its multi-channel audio support, extensive connectivity options, advanced networking capabilities, and automatic calibration system. Its combination of high-quality sound and versatile functionality positions it as an excellent choice for anyone looking to create a top-tier home entertainment system. Whether for casual viewing or serious audiophilia, the TX-NR636 delivers an exceptional audio-visual experience.