Onkyo TX-NR636 manual Connecting Components without Hdmi,  Audio signal connection

Page 4

the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up".

•To enjoy HDCP2.2 protected video, connect the player to the IN3 jack and the TV to the HDMI OUT MAIN jack of the unit. Your player and TV need to support HDCP2.2.

•To play 4K or 1080p video, use the high speed HDMI cable.

•Another TV can be connected to the HDMI OUT SUB jack. To use the function to display the unit's setting screen on the TV, connect the TV to the HDMI OUT MAIN jack.

•It is possible to send video and audio of an MHL-enabled mobile device by connecting the MHL-enabled mobile device to the AUX INPUT HDMI/MHL jacks on the front panel.

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an available jack of your component for cable connection with this unit. Just as the HDMI jacks, other jacks on this unit have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device.

Audio signal connection

1 Digital connection: Use a digital optical cable (OPTICAL) or digital coaxial cable (COAXIAL) for connection.

Digital optical cable (OPTICAL)

¼¼As the digital in optical jack of the unit has a cover, push in the cable against the cover as it is turned inside.

Digital coaxial cable (COAXIAL)

2 Analog connection: Use an analog audio cable for connection with a player.

To output audio of the Blu-ray Disc player or such other player as the source of Zone playback, you need to make analog connection using the analog audio cable between the corresponding jacks of the player and this unit. For details on the Zone function, see the section 6 "Using the ZONE function" of "Step 3: Playing Back".

Analog audio (RCA) cable

3 Connection with turntable: If it uses an MM type cartridge and does not have a built-in audio equalizer, connect it to the 3 PHONO jack. If the connected turntable has a built-in audio equalizer, connect it to the 2 TV/CD jack.

¼¼If it uses an MC type cartridge, install an audio equalizer compatible with MC type cartridge between the unit and the turntable by connecting it to the 2 TV/CD jack. For details, refer to the turntable's instruction manual.

¼¼If the turntable has a ground wire, connect it to the GND terminal of this unit. If connecting the ground wire increases noise, disconnect it.

Video signal connection

The unit has a video upconversion function. For details, see the section on the right.

4 Use a component video cable to connect a TV with component video input jacks and a player with component video output jacks.

Component video cable

¼¼Its transmitted video has higher quality than that of composite video cable.

5 Use a composite video cable to connect a TV with composite video input jack or a player with composite video output jack.

Composite video cable

1

4

5

 

3

2

Step 1: Connections

Video signals input to the composite video input jack or the COMPONENT VIDEO input jacks will be upconverted to HDMI signals and then output from the HDMI output jack.

AV Receiver

¼¼When the video signals input to the COMPONENT VIDEO jacks are upconverted and output from the HDMI output jack, their resolution will be fixed to 480i. Set the output resolution of the player to 480i/576i. If the input has 480p or higher resolution, a message prompting you to change the resolution setting will appear. If your player does not support 480i/576i output, use the composite video jack.

¼¼If multiple video signal inputs are put into one input system, the output will be made in the order of HDMI, component video, and composite video. Note that it is not possible to convert digital audio input signals to analog or vice versa.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents TX-NR636 Features Supplied Accessories How to use the remote controller About the Basic ManualConnecting the TV and players Hdmi cable connection Audio signal connection Connecting Components without Hdmi Video signal connection Connecting speakers Other connections AM/FM antenna connections Headphones connectionNetwork connection Turning the power on Making the Initial Setup with the Setup WizardPlace the speaker setup microphone  1st Step AccuEQ Room Calibration 3rd Step Remote Mode Setup  2nd Step Source ConnectionFollow the guidance displayed on the TV screen Enabling Hdmi Linked Operation and Other Functions Exiting the setup wizard Select and set the authentication methodSetting button  4th Step Network ConnectionRemote controller parts name Select the desired listening modeAdjust the volume with F Playing the player and TVListening modes Other useful functionsListening to AM/FM Radio Registering an AM/FM Radio StationConnecting and playing the Bluetooth- enabled device PairingPlaying sound of the Bluetooth-enabled device Using the Home menuUsing Quick Setup menu Press Q Setup on the remote controller Audio  VideoUsing the Zone function Connecting with Player Connecting speakers in another room Performing Zone playbackFront Panel Rear Panel Display GND terminal The ground wire of the turntable is connectedComposite video and analog audio jacks Analog Cannot access to network Bluetooth Resetting the unit AV receiver turns off unexpectedlyBluetooth Section Amplifier SectionVideo Section Tuner SectionLicense and Trademark Information Precautions For European ModelsDeclaration of Conformity Americas EuropeChina Asia, Oceania, Middle East, Africa

TX-NR636 specifications

The Onkyo TX-NR636 is a remarkable A/V receiver that has garnered acclaim for its impressive array of features and technologies. Designed to meet the demands of home theater enthusiasts, this unit provides a wealth of options for connecting various audio and video devices, ensuring a captivating cinematic experience.

One of the standout features of the TX-NR636 is its multi-channel audio support. This receiver supports 7.2 channel surround sound, offering users the ability to create a comprehensive audio setup. With DTS-HD Master Audio and Dolby TrueHD support, the TX-NR636 delivers high-fidelity audio that enhances movie watching, music listening, and gaming experiences. The dynamic and immersive soundscapes created by these technologies transport users right into the heart of the action, making it a perfect addition to any home theater configuration.

Another key characteristic of the TX-NR636 is its robust connectivity options. The unit is equipped with eight HDMI inputs and two outputs, making it compatible with an array of devices, including Blu-ray players, gaming consoles, streaming devices, and more. This flexibility ensures that users can easily connect all of their electronics without hassle. Additionally, the receiver also includes legacy connectivity options such as composite and component video inputs, ensuring compatibility with older devices.

The TX-NR636 incorporates advanced networking features as well. This receiver is Wi-Fi capable, allowing users to stream audio from various online services, including Spotify, Pandora, and TuneIn. Additionally, it supports Apple AirPlay, providing iOS users with a seamless way to stream their music. With a built-in USB port, users can also connect their flash drives to play back high-resolution audio files, further expanding their listening options.

For a personalized listening experience, the TX-NR636 features Onkyo's AccuEQ room acoustic calibration technology. This innovative system measures speaker output and room acoustics to automatically adjust settings for optimal sound performance. Users can enjoy their favorite content with ideal sound quality tailored to their unique environment.

In summary, the Onkyo TX-NR636 A/V receiver stands out with its multi-channel audio support, extensive connectivity options, advanced networking capabilities, and automatic calibration system. Its combination of high-quality sound and versatile functionality positions it as an excellent choice for anyone looking to create a top-tier home entertainment system. Whether for casual viewing or serious audiophilia, the TX-NR636 delivers an exceptional audio-visual experience.
Top Page Image Contents