Use correct voltage | Mitsubishi Electronics EX100U manual

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It may cause ﬁre or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inad- vertent contact may result in an electric shock. Except as speciﬁcally explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to ﬁx, adjust, or inspect the pro- jector.

Do not modify the projector.

It can lead to ﬁre or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspec- tion. It may lead to ﬁre if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to ﬁre.

Use correct voltage.

If you use incorrect voltage, it can lead to ﬁre.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is oper- ating.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord during operation. It can lead to lamp breakage, ﬁre, electric shock or other trouble. Wait for the fan to stop before unplugging the power cord.

Do not touch the air outlet grilles and bottom plate. Do not touch them or put other equipment close to the air outlet grilles because they become hot during opera- tion. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment. Also, do not put the projector on a desk that is easily affected by heat.

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and ﬁre.

Place of installation

For safety's sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as speciﬁed below.

•Operating temperature: between +41˚F (+5˚C) and +95˚F (+35˚C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector to prevent the projector from being over- heated.

•Do not install the projector at a place that is unstable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic ﬁeld. Also refrain from installing the projector near any cable carrying a large amount of current.

•Place the projector on a solid, vibration-free surface. Otherwise it may fall, causing serious injury or dam- age.

•Do not stand the projector on its end. It may fall, causing serious injury or damage.

•Slanting the projector more than ±10˚ (right and left) or ±15˚ (front and rear) may cause trouble or explo- sion of the lamp.

•Do not place the projector near air-conditioning unit or heater to avoid the air outlet and inlet grilles from being exposed to hot air.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio / TV technician for help.

Changes or modiﬁcations not expressly approved by Mitsubishi could void the user's authority to operate this equip- ment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN - 5

EX100U specifications

The Mitsubishi Electronics EX100U is a compact yet powerful variable frequency drive (VFD) designed for a wide range of industrial applications. This drive is particularly known for its efficient control of three-phase AC motors, making it an ideal choice for various automation and control processes.

One of the standout features of the EX100U is its advanced control algorithms, which ensure precise motor performance and energy efficiency. The drive offers multiple control modes, including V/F control, vector control, and sensorless vector control. This flexibility allows users to select the most suitable mode based on their specific application requirements, whether it be for conveyors, fans, pumps, or other machinery.

The EX100U is equipped with a user-friendly interface that includes an intuitive keypad and a large LCD display, making it simple to monitor and adjust settings. The drive's compact design is another significant advantage, allowing it to fit into tight spaces while providing robust performance. Its small footprint does not compromise on functionality, as the EX100U can handle a broad range of power ratings, making it suitable for both small and large scale operations.

In terms of connectivity, the EX100U supports various communication protocols such as Modbus, CC-Link, and Profibus, ensuring seamless integration with different control systems and networks. This feature enhances its versatility, allowing for easier implementation in existing industrial setups.

Moreover, the EX100U incorporates advanced safety features, including built-in protection against overloads, short circuits, and overheating. This not only helps in prolonging the lifespan of the equipment but also ensures safe operation in demanding environments.

The energy-saving capabilities of the EX100U are noteworthy, as it can significantly reduce energy consumption through its intelligent motor control and regenerative braking functions. As industries increasingly focus on sustainability, the drive contributes to reducing operational costs while promoting environmentally friendly practices.

In conclusion, the Mitsubishi Electronics EX100U is a robust and versatile variable frequency drive that offers a combination of advanced technologies, user-friendly interface, and energy efficiency. Its ability to cater to various applications while ensuring reliability makes it a valuable asset in modern industrial settings, positioning it as a preferred choice among engineers and facility managers.