Mitsubishi Electronics EX100U Preparation for projection, Adjustment of the projection angle

Page 12

Preparation

Preparation for projection

1.Attach the provided power cord to the projector.

2.Plug the power cord in the wall outlet.

3.Remove the lens cap.

Warning:

•Do not look into the lens directly when the projector is on.

•The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up.

Remove the lens cap when you turn on the projector.

•The power cords for use in the U.S. and Europe are provided with this projector. Use the appropriate cord for your country.

•This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesn't fit your wall outlet, ask an electrician to change the wall outlet.

•The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power sup- ply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropriate power cord sepa- rately.

•Use 100-240 V AC 50/60 Hz to prevent fire or elec- tric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or elec- tric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

Adjustment of the projection angle

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector.

Screen

Adjustment feet (Rear)

1.Tilt up the project to the appropriate angle.

2.Press the foot adjustment buttons next to the adjust- ment feet (rear), and the adjustment feet will come out.

3.Release the buttons to lock the adjustment feet (rear) to that position.

4.Rotate the adjustment feet (rear) for fine adjustment.

After using the projector:

5.Put the adjustment feet (rear) back into the projector by pressing the foot adjustment buttons.

Important:

•If necessary, rotate the adjustment feet (front) for fine adjustment.

•Install the screen on a flat wall at 90 degrees to the floor.

•Slanting the projector more than ±10˚ (right and left) or ±15˚ (front and rear) may cause trouble or explo- sion of the lamp. You can tilt the projector up to 7 degrees using the adjustment feet only.

•Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen.

•To correct vertical keystone distortion, press the KEYSTONE button on the projector or the remote

control to display KEYSTONE, and adjust the image by pressing the ￿, ￿ button (or VOLUME +, - but- ton on the remote control).

In the following cases:

Press the ￿

Press the ￿

(or -) button.

(or +) button.

Important:

•When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn't mean a projection angle.

•The allowable range of the adjustment value in the keystone adjustment varies depending on the instal- lation conditions.

•When the keystone adjustment takes effect, the res- olution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

•Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the key- stone adjustment. In such cases, set the keystone adjustment values in the range where the image is displayed without noise.

•When the keystone adjustment is carried out, the im- age may not be displayed correctly because of the type of input signal.

For ES100U only

•When the 720p or 1080i signal is input, the keystone adjustment ranges are limited.

EN - 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EX100 ES100 When using the projector in Europe Compliance NoticeContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is oper- atingPlace of installation Never remove the cabinet Do not modify the projectorOverview Control panelTerminal board Bottom side Remote control Adjustment foot Front Lamp cover Adjustment feet RearRemote control Battery installationOperation range of the remote control Reception angle verticalInstallation Layout of the projectorRear projection Front projectionBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Projector + Computer For MacintoshAbout DDC For computer with Mini D-SUBAdjustment of the projection angle After using the projectorPreparation Preparation for projectionPower-on Basic operationPower-off Volume from the speakerAnamorphic mode Auto Position buttonMenu operation Basic operationMenu operation Signal User No need to adjust in normal use Image adjustment Image adjustmentColor temperature About color temperatureAdjustment of the image from the computer Simple adjustment methodAdvanced features StillPage-up and page-down ConnectionPassword function To enable the password functionTo cancel the password function Lamp replacement Interval of lamp replacementReset of the lamp operation time Troubleshooting Problem Cause and solutionImages arent projected on the screen Troubleshooting Images arent projected correctlyCleaning of the projector and the ventilation slots Cleaning of the lensOthers Indicators Normal conditionSpecifications Kensington LockReplacement part SpecificationsCGA84 Mitsubishi Electric Corporation

EX100U specifications

The Mitsubishi Electronics EX100U is a compact yet powerful variable frequency drive (VFD) designed for a wide range of industrial applications. This drive is particularly known for its efficient control of three-phase AC motors, making it an ideal choice for various automation and control processes.

One of the standout features of the EX100U is its advanced control algorithms, which ensure precise motor performance and energy efficiency. The drive offers multiple control modes, including V/F control, vector control, and sensorless vector control. This flexibility allows users to select the most suitable mode based on their specific application requirements, whether it be for conveyors, fans, pumps, or other machinery.

The EX100U is equipped with a user-friendly interface that includes an intuitive keypad and a large LCD display, making it simple to monitor and adjust settings. The drive's compact design is another significant advantage, allowing it to fit into tight spaces while providing robust performance. Its small footprint does not compromise on functionality, as the EX100U can handle a broad range of power ratings, making it suitable for both small and large scale operations.

In terms of connectivity, the EX100U supports various communication protocols such as Modbus, CC-Link, and Profibus, ensuring seamless integration with different control systems and networks. This feature enhances its versatility, allowing for easier implementation in existing industrial setups.

Moreover, the EX100U incorporates advanced safety features, including built-in protection against overloads, short circuits, and overheating. This not only helps in prolonging the lifespan of the equipment but also ensures safe operation in demanding environments.

The energy-saving capabilities of the EX100U are noteworthy, as it can significantly reduce energy consumption through its intelligent motor control and regenerative braking functions. As industries increasingly focus on sustainability, the drive contributes to reducing operational costs while promoting environmentally friendly practices.

In conclusion, the Mitsubishi Electronics EX100U is a robust and versatile variable frequency drive that offers a combination of advanced technologies, user-friendly interface, and energy efficiency. Its ability to cater to various applications while ensuring reliability makes it a valuable asset in modern industrial settings, positioning it as a preferred choice among engineers and facility managers.
Top Page Image Contents