Pairing
Pairing is necessary when using the
1.Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH indicator starts flashing.
2.While the BLUETOOTH indicator is flashing, complete connection on the
•If a password is requested, enter "0000".
•When connecting the unit to any other Bluetooth- enabled device, start pairing by pressing and holding BLUETOOTH until the BLUETOOTH indicator starts flashing. This unit can store the data of up to ten paired devices.
Playing sound of the Bluetooth-enabled device
If the unit is on and the
•It may take about a minute until connection is established when the unit is on since the Bluetooth function takes some time to start up.
•If the volume setting on the
•Due to the characteristics of Bluetooth wireless technology, the sound produced on this unit may slightly be behind the sound played on the
4 Using the Home menu
In the Home menu, you can make advanced settings and use Internet radio and DLNA.
1.Press RCV on the remote controller and then press HOME.
The Home menu displays on the TV screen. You can also use the HOME button on the main unit.
H o m e
S e t u p
N e t w o r k S e r v i c e
U S B
S l e e p T i m e r
I n s t a P r e v u e
2.Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
•For details on the Setup menu and how to play Internet radio, DLNA and USB storage device, see the Advanced Manual (http://www.onkyo.com/manual/ txnr535/adv/en.html).
•To return to the previous screen, press RETURN. To return to the Home menu, press HOME.
Setup: You can change the assignment of input terminals and input selector buttons and also make various speaker settings and other advanced settings.
Network Service: Select to use various Internet radio services and DLNA.
• "Network Setup" becomes selectable after the network starts up even if it cannot be selected first. It may take about a minute to start up.
USB: Select to connect a USB storage device to the USB port so that it can be played.
• "USB" becomes selectable after the USB function starts up even if it cannot be selected first. It may take about a minute to start up.
Sleep Timer: Select to turn the unit into standby mode automatically when the specified time elapses.
Step 3: Playing Back
InstaPrevue: Select to preview videos input from the HDMI input jacks collectively in a single screen. The screen has a main window (current input video) and sub windows (other input videos). To switch the current input, select the desired sub window with the cursor buttons and press ENTER.
• A black sub window is shown for the input with no video signals.
• "InstaPrevue" cannot be selected if the video is being input from HDMI IN 6 or there is no signal from the input currently selected.
• Depending on video signals, the picture may not be properly rendered on the preview thumbnails.
5 Using Quick Setup menu
In the Quick Setup menu, you can set frequently used functions including input selection and volume adjustment.
1.Press Q SETUP on the remote controller.
The Quick Setup menu is displayed on the connected TV's screen.
Q u i c k S e t u p
I n p u t
A u d i o
I n f o r m a t i o n
L i s t e n i n g M o d e
2.Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
•To return to the previous screen, press RETURN.
Input: Select the input and check the assignment of input selector buttons.
Audio:
A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap.
•It cannot be set when audio is played from the TV's speakers.
•It cannot be set if the input is "NET", "USB" or "BLUETOOTH".
•It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
12