Step 2: Setting Up
1 Turning the power on
Connect the power cord to the outlet (). Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode.
•When the unit is turned on, a large instantaneous current may flow affecting functionality of the computer and other devices. It is recommended to use a separate outlet from
that for the computer or such other sensitive devices.
¼¼Taiwanese model includes a removable power cord. Connect the power cord to AC INLET of the unit and then connect to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
Firmware update notification: If the unit is connected via LAN and there is firmware update available, the "Update New F/W" message will appear. Press the / buttons on the remote controller to select whether to update or not and press ENTER to confirm your selection. For details on firmware update, see the Advanced Manual (http://www. onkyo.com/manual/txnr535/adv/en.html).
2 Making automatic speaker setting
The AccuEQ Room Calibration function, our proprietary technology, collects the test tones coming from each speaker with the supplied speaker setup microphone and performs automatic setting of the number of speakers, volume level, each speaker's optimum crossover frequencies, and distance from the primary listening position. Distortion caused by difference of room acoustic environment will also be corrected to produce clear, well- balanced sound.
1.Place the speaker setup microphone at the measurement position .
•Correct measurement will not be possible if the microphone is held by hand. It is desirable that the microphone be placed on a stand at the height of listener's ears. Measurement is not possible if headphones are being used.
TV
2.Connect the speaker setup microphone to the SETUP MIC jack on the unit.
SETUP MIC jack
Speaker setup microphone
3.Follow the guidance displayed on the TV screen. You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
A c c u E Q | R o o m C a l i b r a t i o n |
| |
|
|
|
|
S u b w o o f e r | < | Y e s | > |
[ E N T E R ] : N e x t
: Listening area | : Measurement position |
| with microphone |
4.The test tones sound from the connected speaker and automatic speaker setting starts.
The microphone measures the test tones. Measurement will be made twice for each speaker. It takes several minutes to be completed.
•Each speaker generates test tones at high volume level during measurement. Keep the room as quite as possible during measurement. Measurement may be interrupted if there is ambient noise or radio frequency interference. Close the window and turn off the home appliance and fluorescent light.
•To cancel measurement on the way, disconnect the microphone plug.
7