Mitsubishi Electronics X50, X70 user manual Menu operation

Menu operation (continued)

1IMAGE

CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher			Opt	XGA60
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as	IMAGE
the number increases.		CONTRAST		0
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page		BRIGHTNESS		0
18.		COLOR MATRIX		USER
COLOR TEMP... . Adjusts color temperature. See page 18.		COLOR TEMP.		STANDARD
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes		SHARPNESS		0
sharper as the number increases.		TINT		0
TINT .................... Adjusts the color balance of the image. The color balance		COLOR		0

of the image shifts green as the number increases and

shifts to purple as the number decreases (displays only when the source is selected to VIDEO).

• When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.

COLOR ................ Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).

2INSTALLATION

IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is			Opt	XGA60
used for rear projection. MIRROR INVERT is effective
	INSTALLATION
when the projector is ceiling-mounted.
		IMAGE REVERSE		OFF
KEYSTONE ........ Adjusts keystone correction of the image. If the image has
		KEYSTONE		0°
keystone distortion, select the approximate setting. For
normal use, select 0˚. (Displays LVP-X70U only).		AUTO POWER ON		OFF
AUTO POWER ON ..... To select whether to boot up automatically when the power is		AUTO POWER		OFF
		OFF
turned on external to the projector. In this case, the main
power switch of the projector has to be ON. Set this when the projector is hanging on the ceiling.

•The projector is in stand-by mode when the lamp is not on. In this case, use the remote control to turn on the lamp.

AUTO POWER OFF ..Use to select the length of time before projector switches to stand-by when there is no input signal selected source. Select 0 min. to cancel this function.

3FEATURES

MENU POSITION . Use to select the position where the menu is displayed,					Opt	XGA60
(upper left) or (lower right).
	FEATURE
EXPAND MODE Selects the mode of enlarging screen. See page 21.
				MENU POSITION		1.
FRAME POSI. .... Sets the position of sub screen. See page 21.(Displays
LVP-X70U only).		A		EXPAND MODE		1.
			A
AUDIO MODE ....... Select 1 (COMPUTER mode) to output the sound which is				FRAME POSI.		1.
		A	A
inputted to audio input terminal only when the source is				AUDIO MODE		2
selected to COMPUTER. Select 2 (VIDEO mode) to output	?			VIDEO SIGNAL		AUTO
the sound which is inputted to audio input terminal only				ANAMORPHIC		OFF
when the source is selected to VIDEO . Select 3				LANGUAGE		English
		A	Ë

(PARMANENT mode) to output the sound which is inputted to audio input terminal all time.

SPLASH SCREEN . Use to display the splash screen on the screen when the power is turned ON.

VIDEO SIGNAL . When AUTO is set, the appropriate video format is automatically selected according to the input signal. If the image does not appear correctly, select the desired video format manually. Adjust the projector to the appropriate format when the projector either is not projecting normally in auto mode or is projecting PAL-M/PAL-N signals.

ANAMORPHIC ... Set to ON when displaying DVD discs which are recorded as squeezed images (in right and

left direction).
LANGUAGE ....... Use to select the language for the projector display such as menu. (		/ English / Español
/ Deutsch / Français / Italiano /	)

EN – 16