Mitsubishi Electronics WD620U-G, XD600U-G user manual Rear projection

Page 11

Installation (continued)

Rear projection

Ask a specialist for installation. For details, consult your dealer.

For rear projection, set IMAGE REVERSE in the INSTALLATION menu to MIRROR. See page 23.

Caution:

Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the pro- jector to facilitate ventilation.

Place the projector at least 50 cm (or 20 inch) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.

Do not use the projector in the following locations and manners, which may cause fire or electric shock.

In a dusty or humid place.

In a sideways or upside-down position.

Near a heater.

In an oily, smoky, or damp place such as a kitchen.

In direct sunlight.

Where the temperature rises high, such as in a closed car.

Where the temperature is lower than +41°F (or +5°C) or higher than +95°F (or +35°C ).

Important:

Do not apply force to the lens, because the lens may be damaged.

Be sure to use this projector at an altitude of less than 1500 meters.

ENGLISH

EN-11

Image 11
Contents XD600U XD600U-G WD620U WD620U-G Shock When using the projector in EuropeContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Do not unplug the power cord during operationKensington Lock OverviewControl panel Terminal boardOverview Bottom side Remote controlOperation range of the remote control Remote controlBattery installation Front projection InstallationLayout of the projector XD600U/XD600U-G Layout of the projector WD620U/WD620U-GFront projection, ceiling mounting InstallationCeiling Mount Installation Rear projection Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV device Hdmi Basic connectionsConnection for video equipment having an Hdmi terminal Projector + Computer Preparation for projection Adjustment of the projection angleUsing the adjustment feet front PreparationBasic operation Power-onWhen fine streaks are seen on projected images Basic operation Wall Screen When connecting to a laptop computerContrast Menu operationQuick Menu Basic operation Quick Menu Color Enhancer Auto PresentationInformation menu Menu operationMenu Options Detail Menu Image Advanced menu Basic operationImage menu Installation menu Feature menu Menu Signal User menuSingal menu Network menuEN-26 Color Enhancer Image adjustmentAdjusting projected images Gamma modeLPF Progressive filter Image adjustmentSimple method to adjust the image position BrilliantColorTMIP Settings Network settingsSetting Projector Name Network Password SettingsNetwork settings Glossary How to Use Network FunctionFreeze Advanced featuresPassword function Magnify Advanced featuresTo cancel the password function To use the Magnify modeConnection Supervising and controlling by computerMajor functions When the projector is mounted to the ceiling Lamp replacementWhen the projector is placed on the table Reset of the lamp operation time Lamp replacementInterval of lamp replacement No image appears on the screen TroubleshootingPower Status LPF TroubleshootingImages are not displayed correctly Others MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensAbnormal condition IndicatorsNormal condition Specifications Replacement part SpecificationsConnectors Dimensional drawings unit mmVGA72 CGA84CGA85 VGA60Mitsubishi Electric Corporation