Mitsubishi Electronics XD600U, WD620U Menu operation, Quick Menu Basic operation, Contrast

Menu operation

As one of the two types of MENU display, following QUICK MENU appears on the screen when pressing MENU button on the remote control. In addition, DETAIL MENU (See page 21) appears when selecting DETAIL MENU in this MENU and pressing ENTER button.

•Comparing QUICK MENU with DETAIL MENU, if the contents in those two menus are same each other, the functions in those two menus are same as well.

•To close QUICK MENU or DETAIL MENU, press MENU button when MENU is displayed.

QUICK MENU

* Menus are not displayed when no signal is supplied to the projector.

QUICK MENU	COLOR ENHANCER	AUTO
		PRESENTATION
		STANDARD
		THEATER
		USER
	CONTRAST	±30
	BRIGHTNESS	±30
	COLOR TEMP.	STANDARD
		LOW
		HIGH
		USER
	SHARPNESS *1	±5
	LAMP MODE	STANDARD, LOW
	ASPECT	NORMAL, 16:9, FULL
	USER MENU
	SELECT USER MENU	COLOR
		TINT
		CLOSED CAPTION
		WALL SCREEN
		STANDBY MODE
		AUDIO INPUT
		IMAGE REVERSE
		MENU POSITION
		CINEMA MODE
		WXGA
		LANGUAGE
	DETAIL MENU	OK
INFORMATION	LAMP TIME (LOW)
	INPUT
	RESOLUTION
	VERTICAL FREQUENCY
	HORIZONTAL FREQUENCY
	SYNC. TYPE *2

*1 Not available with certain signals

*2 Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.

ENGLISH

QUICK MENU Basic operation

Several settings can be adjusted using the menu. Example : Contrast setting

1.Press the MENU button.

QUICK MENU

2.Press the ENTER button (or T button).

QUICK MENU
COLOR	AUTO
ENHANCER

3.Press the S or T button to select CONTRAST.

CONTRAST0

4.Press the W or X button to adjust the contrast.

CONTRAST+10

5.Exit the menu by pressing the MENU button several times.

Important:

•When the button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

•After selecting the items marked with , press the ENTER but- ton.

EN-19