Mitsubishi Electronics SD110, XD110 user manual Menu operation, Basic operation, XGA60, English

Menu operation

IMAGE

CONTRAST

BRIGHTNESS

WHITE ENHANCE

COLOR TEMP.

COLOR

TINT *1

SHARPNESS *1

GAMMA MODE

±30
±30
AUTO, 0 - 10
STANDARD	CONTRAST R	±30
LOW	CONTRAST B	±30
HIGH	BRIGHTNESS R	±30
USER	BRIGHTNESS B	±30
±10
±10
±5
AUTO, DYNAMIC, STANDARD, THEATER

ENGLISH

INSTALLATION	AUTO POWER ON	ON , OFF
	AUTO POWER OFF	OFF, 5, 10, 15, 30, 60 min
	SPLASH SCREEN	ON , OFF
	BACK COLOR	BLUE, BLACK
	LAMP MODE	STANDARD, LOW
	IMAGE REVERSE	OFF, MIRROR, INVERT, MIRROR INVERT

(These items are not available when the

FEATURE	MENU POSITION		1 (Upper left), 2(Lower right)				input source is COMPUTER.)
	CINEMA MODE *3		AUTO , OFF
	VIDEO SIGNAL		AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
	ANAMORPHIC		ON , OFF
	PASSWORD FUNCTION		MENU ACCESS		LOCK	OK
					UNLOCK	OK
	LANGUAGE
	RESET ALL		OK
SIGNAL	HORIZ.POSITION		0 - 999	*4
	VERT.POSITION		0 - 999	*4
	FINE SYNC.	*2	0 - 31
	TRACKING	*2	0 - 9999	*4
	COMPUTER INPUT	*2	RGB, YCBCR / YPBPR

SET UP		OFF / 3.5% / 7.5%
HOLD	*2	ON	BEGIN	0 - 15	*4
		OFF	END	0 - 15	*4

			CLAMP POSITION	0 - 63	*4
USER	*2	ON
			CLAMP WIDTH	1 - 63	*4

*1: Not available with certain signals.

*2: Not available when the source is a VIDEO or S-VIDEO signal.

*3: Available only when the input signal is TV60, 480i.

*4: Setting range differs depending on the input signals.

Basic operation

Several settings can be adjusted using the menu. OFF. Example : Auto power off time setting

1.Press the MENU button.

4.Press the S or T button to select AUTO POWER OFF.

AUTO POWER	OFF
ON
AUTO POWER	OFF
OFF

5.Press the W or X button to adjust the auto power off time.

opt.

IMAGE

XGA60

AUTO POWER	OFF
ON
AUTO POWER	30 min
OFF

2.Press the W or X button to select INSTALLATION.

opt.

XGA60

INSTALLATION

3.Press the ENTER button (or T button).

opt.

XGA60

INSTALLATION

AUTO POWER	OFF
ON

AUTO POWER	OFF
OFF

6.Exit the menu by pressing the MENU button several times.

Important:

•When the button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

•After selecting the items marked with , press the ENTER button.

EN-15