Mitsubishi Electronics WL2650 Using the remote control, Operational range of the remote control

Using the remote control

Operational range of the remote control

Front of projector Rear of projector

• Keep the remote control photo-sensor out of direct

sunlight or fluorescent lamp light.

• Keep the remote control photo-sensor at least 2 m (6

feet) away from fluorescent lamps. Otherwise, the

remote control may malfunction.

• If there is an inverter-operated fluorescent lamp

near the remote control, the remote control opera-

tion may become unstable.

• When you use the remote control too close to the

remote control sensor, the remote control may not

30° 30°

30° 30°

Operate the remote control within a distance of 10 m (30 feet) from the projector, pointing the light beam at the remote control photo-sensor (front or rear) of the projector.

work correctly.

When operating the remote control, keep the distance from the remote control to the projector via the screen within about 5 m (15 feet). The operable range of the remote control, however, depends on the characteristics of the screen.

Reception angle

Vertical directions

20°

10°

20°

10°

Vertical directions (ceiling mount)

20°

20°

EN-9