Mitsubishi Electronics WL2650U Specifications, Replacement part option/not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		LCD projector
Model		WL2650U
Display Technology		0.75-inch LCD panel: 3 pieces (for R,G,B)
		Pixel: 1280 x 800 = 1024000 pixels			Total 3072000 pixels
		Active pixel rate: 99.99% or more (each panel)
Projection lens		F 1.7 - 1.9 f= 24 - 29 mm
Light-source lamp		261 W
Image size (Projection distance)		40” min. to 300” max. (Projection distance 1.2 to 9.6 m)
Maximum	Computer signal	Maximum resolution: 1600 x 1200 dots (Analog)/compressed
resolution		Panel resolution: 1280 x 800 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
	signal	Panel resolution: 1280 x 800 dots
Computer/Component video input		[Signal type]		[Terminal type]	[Line]
		Analog RGB		Mini D-SUB 15-pin	2
		Digital RGB		DVI-D	1
Video input		[Signal type]		[Terminal type]	[Line]
		Video input		RCA	1
		S-Video input		S	1
Audio input		[Signal type]		[Terminal type]	[Line]
		RGB		Stereo mini jack (ø3.5)	2
		Video		RCA (L, R)	1
		S-video		RCA (L, R)	1
Monitor output		[Signal type]		[Terminal type]	[Line]
		Analog RGB		Mini D-SUB 15-pin	1
Audio output		[Signal type]		[Terminal type]	[Line]
		RGB/Video/S-video		Stereo mini jack (ø3.5)	1
Speaker		3 W Mono Round type ø4.5 cm x 1
Control terminal/Others		RS-232C (D-SUB 9-pin), USB terminal, LAN terminal (RJ-45)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240 V, 50/60 Hz
Power consumption		3.9 A
Dimensions		333 mm (W) x 113 mm (H) x 272 mm (D) * Not including protrusion.
Weight		4.7 kg
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
	input		Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB:	Vp-p=0.7 V 75 Ω
		YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD:	TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
	Audio input	350 mVrms, 10 kΩ or more

Replacement part (option/not included in the box)

Spare lamp: VLT-XL650LP

Option lenses: OL-XL2550MZ, OL-XL2550LZ, OL-XL2550TZ

EN-44