Mitsubishi Electronics WD385U-EST user manual Basic connections, Projector + AV device

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.

Important:

•Make sure that the connected device is turned off before starting connection.

•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord.

•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.

•See the owner’s guide of each device for details about its connections.

Projector + AV device

S-VIDEO

(option)

VIDEO

(option)

AUDIO IN-3L

(option)

AUDIO IN-3R

To audio output (L)

To audio output (R)

VCR, etc.

To video output

To S-Video output

Important:

•Match the colors of the video and audio plugs on the Audio cable with those of the terminals.

•Speaker output is mono.

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER IN terminal.

Audio cable (option)

DVD player or HDTV decoder

To audio output

BNC - RCA connector (option)

No connection

B R G

Mini D-SUB 15-pin - BNC conversion cable (option)

Important:

COMPUTER IN

•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminal’s names vary depending on the connected devices.

•Use a Mini D-SUB 15-pin - BNC conversion cable for connection.

•Image may not be projected correctly with some DVD players.

•When connecting a HDTV decoder having RGB output terminals, set Computer Input to RGB in the Signal menu.

EN-12