Mitsubishi Electronics WD385U-EST Advanced features, Password lock, Using the interactive pen

Advanced features (continued)

Password lock

This projector provides the password lock function that is intended to prevent wrong operations by children and set controlled access for specified users. If the password lock is enabled, when the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.

To set a password:

(See page 21 for menu setting.)

1.Display the Option menu.

2.Press the  or  button to select Password.

Password OK

3.Press the ENTER button.

• The Password menu appears.

		Password
Password				Off
Change Password			[ ���� ]
	Adjust			Confirm
	Select

4. Press the  or  button to select Password.

Password Off

5.Press the  or  button to select On or Off.

6.Press the MENU button to exit the menu.

Important:

•To disable the password lock when the screen for entering the password is displayed, press the MENU and ENTER buttons on the projector at the same time.

Using the interactive pen

You can operate the computer connected to this projector using the supplied (or separately sold, commercially available) interactive pen. Before operating the computer, make the following preparation.

•For the operating procedure of the interactive pen, see the User Manual supplied with the interactive pen.

Preparation for using the interactive pen:

1.Connect the projector to the computer using the supplied USB cable as shown below.

4.Press the  or  button to select Change Password.

5.Press the ENTER button.

•The screen for entering a new password appears.

Password

Password		Off
New Password	[	]
Adjust		Confirm
Select

•When the password has already been set, the screen for entering the old password appears instead. In such a case, enter the old password using the same operation as in next step and press the ENTER button. Then the screen for entering a new password appears.

6.Enter a 4 digit password using the , ,  and  buttons.

(=1, =2, =3, =4)

•To cancel the procedure, press the MENU button.

7.Press the ENTER button.

8.Press the MENU button to exit the menu.

To enable or disable password lock:

(See page 21 for menu setting.)

1.Display the Option menu.

2.Press the  or  button to select Password.

3.Press the ENTER button.

• The Password menu appears.

Computer

To USB	USB 5-pin	USB	To USB
mini-B	(type	4-pin	port
terminal	mini-B)	(type A)

USB cable

2.Configure the necessary settings in the Interactive Pen menu. (See page 29.)

•To make the pairing setting, follow the procedure described below.

Settings for making the pair:

(See page 21 for menu setting.)

1.Display the Interactive Pen menu.

2.Press the  or  button to select Pair New Device.

Pair New Device OK

3.Press the ENTER button.

•The dialog appears to suggest switching to the pairing preparation mode.

4.Switch the mode of the interactive pen to the pairing preparation mode using the P button on the pen.

•For details of the operating procedure, see the

User Manual supplied with the interactive pen.

5.Press the ENTER button.

•The communication for making the pair is carried out, and then the indicator of the pen notifies whether the pairing succeeds or not.

EN-47