Onkyo TX-8050 Enjoying Audio Sources, Muting the Receiver remote controller only

Enjoying Audio Sources

INPUT

SELECTOR

SPEAKERS A, B VOLUME

PHONES INPUT

1 Rotate the receiver’s [INPUT] selector, or press the remote controller’s INPUT SELECTOR buttons to select the source you want to hear.

2 Use the [SPEAKERS A] and [SPEAKERS B] buttons on the receiver to select the speaker set that you want to use.

The A and B speaker indicators show whether each speaker set is on or off.

A,B Indicators

VOLUME ￿/￿

MUTING

Muting the Receiver (remote controller only)

You can temporarily mute the output of the receiver.

Press the remote controller’s [MUTING] button.

The receiver is muted.

To unmute the receiver, press the [MUTING] button again.

Note:

The Mute function will be cancelled if the remote controller’s [VOLUME] buttons are pressed or the receiver is set to Standby.

3 Start playback on the selected component.

4 To adjust the volume, use the receiver’s [VOLUME] control, or the remote controller’s VOLUME []/[] buttons.

Turn the control clockwise to turn up the volume or counterclockwise to turn down the volume.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch phone plug) to the receiver’s PHONES jack for private listening.

Notes:

•Always turn down the volume before connecting your headphones.

•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.

•If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.

En-19