Onkyo TX-8050 Listening to the Radio, Listening to AM/FM Stations, Press the Tuning  or  button

Page 23

Listening to the Radio

 

 

￿/￿

 

TUNING ￿/￿

 

 

 

Number

 

 

buttons

INPUT

TUNING MODE

D.TUN

Listening to AM/FM Stations

With the built-in tuner, you can enjoy AM and FM radio stations.

1 Use the receiver’s [INPUT] selector, or the

remote controller’s INPUT SELECTOR buttons to select AM or FM.

In this example, FM has been selected.

Band Frequency

(Actual display depends on the country.)

2 Press the [TUNING MODE] button so that the AUTO indicator appears or disappears from the display.

AUTO indicator

Auto Tuning

To activate this mode, press the [TUNING MODE] button to turn on the “AUTO” indicator. In this mode, you will receive the broadcast in stereo sound.

Manual Tuning

To activate this mode, press the [TUNING MODE] button to turn off the “AUTO” indicator. In this mode, you will receive the broadcast in monaural sound.

3 Press the TUNING [] or [] button.

You can also use the remote controller’s arrow []/[] buttons to tune the radio.

Auto Tuning

Searching stops when a station is found.

Manual Tuning

The frequency stops changing when you release the button.

Press the buttons repeatedly to change the frequency one step at a time.

The frequency changes in 0.05 MHz steps (or 0.05 MHz to 0.2 MHz for North American model) for FM, and

9 kHz (or 10 kHz) steps for AM.

When tuned to a station, the TUNED indicator appears. When tuned to a stereo FM station, the FM STEREO indicator also appears.

TUNED

FM STEREO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tuning to Weak FM Stereo Stations

If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.

En-23

Image 23
Contents TX-8050 Avis Important Safety InstructionsBatteries and Heat Exposure Warning PrecautionsPower Preventing Hearing Loss CautionIPod/iPhone*1 Digital Direct Connection via FeaturesPrecautions Clean Design Aluminum Front Panel Network CapabilityContents Aiming the Remote Controller Supplied AccessoriesFront Panel Getting to Know the ReceiverDisplay Getting to Know the ReceiverRear Panel Using the Remote Mode buttons Remote ControllerStrip about 5/8 15 mm Connecting the ReceiverSpeaker Connection Precautions Connecting the Speaker CablesConnecting a Power Amplifier Connecting the ReceiverConnecting a Powered Subwoofer Controller to complete the setting Configuring the Speaker ImpedanceChange the impedance value to 4 Ω using Press the Setup button on the remoteTips Connecting AntennasAV Cables and Jacks Connecting Your ComponentsConnecting AV components About AV ConnectionsHow to record a video source Connecting Your ComponentsDirect Change Connecting Onkyo  ComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting a Recording ComponentChanging the Input Display Turning On the ReceiverTurning On and Standby Enjoying Audio Sources Muting the Receiver remote controller onlyUsing Headphones Press the remote controller’s Muting buttonEnjoying Audio Sources Setting the Display BrightnessUsing the Sleep Timer remote controller only Using the Tone and Balance ControlsEnjoying the Pure Audio Sound Selecting the Listening ModePrepare the recorder RecordingRecording the Input Source Recording Audio and Video from Separate SourcesListening to AM/FM Stations Press the Tuning  or  buttonListening to the Radio Listening to the Radio Presetting AM/FM StationsTuning into Stations by Frequency Press the remote controller’s D.TUN buttonSpace Switching the DisplayName Edit Left/RightRDS Program Types PTY Using RDS European model onlyWhat is RDS? Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Playing Music Files on the iPod/iPhone Using the USB/Network DeviceConnecting the iPod/iPhone Directly to the USB Port Playing the USB Device Using the USB/Network DevicePress NET button Listening to the Internet RadioListening to vTuner Internet Radio Listening to Other Internet RadioUse / to select DLNA, and press Enter Registering Presets*1Playing Music Files on a Server Start your computer or media server Press NETRemote Playback Windows Media Player 11 SetupWindows Media Player 12 Setup Using Remote PlaybackSelect the receiver from right-click menu Adjusting the VolumeOn Windows Media Player 12, right-click on music file Server Requirements Network/USB FeaturesConnecting to the Network Network RequirementsAbout Dlna Network/USB FeaturesUSB Device Requirements Supported Audio File FormatsUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock RI Dock IPod/iPhone Playback via Onkyo DockControlling Your iPod/iPhone Extended mode Standard mode Dock Controlling Other ComponentsIntelli Volume Advanced SetupChanging the Advanced Setup Settings Example Intelli volume setting procedureHardware Setup Advanced SetupAdvanced Setup Menu Source SetupNetwork Setup Zone2 SetupVia USB Firmware UpdateVersion Receiver Via NETZone Connecting ZoneZone 2 Out Settings Press the Setup buttonTobutton.turn off Zone 2, press the Zone 2 OFF Using ZoneFollowed by the  button Adjusting the Volume of ZoneMuting Zone Checking the Source Selected for ZoneExample for the main room If Remote Controller Signal Does Not Reach Other ComponentsEffective Sensor Layout Making Sensor ConnectionsBefore you start Firmware UpdateUpdate procedure Updating the Firmware via NetworkUpdating the Firmware via USB Firmware UpdateTroubleshooting Europe China, Hong Kong Errors during an update via USBSelect the USB input source AmericasVideo TroubleshootingPower AudioZone TroubleshootingUP-A1 Dock for iPod/iPhone RecordingOthers USB Device PlaybackTuner Section SpecificationsAmplifier Section Video SectionMemo En-56
Related manuals
Manual 2 pages 52.83 Kb

TX-8050 specifications

The Onkyo TX-8050 is a standout model in the world of integrated stereo receivers, designed to deliver exceptional audio performance and a wide array of features for both music lovers and home theater enthusiasts. This versatile receiver is known for its powerful amplification, robust connectivity, and user-friendly interface, making it an ideal choice for enhancing any audio system.

One of the main features of the TX-8050 is its impressive amplification capabilities. With a power output of 100 watts per channel, it can drive even the most demanding speakers, providing clear and dynamic sound across a variety of music genres. The use of advanced circuitry and high-quality components ensures low distortion, delivering a pure and immersive listening experience.

In terms of connectivity, the TX-8050 is well-equipped to handle all your audio sources. It offers multiple inputs, including six line-level inputs, a phono input for vinyl enthusiasts, and a digital audio input section featuring coaxial and optical connections. This ensures compatibility with various devices, including CD players, turntables, and digital streaming units.

A key highlight of the Onkyo TX-8050 is its built-in streaming capabilities, allowing users to access a wide range of online music services, including Pandora and Spotify. With the ability to connect to a home network via Ethernet, the receiver supports high-resolution audio streaming, ensuring that your digital music files are played back with remarkable fidelity. The inclusion of USB inputs further facilitates playback of music files stored on external drives, making it easy to enjoy your favorite tracks.

The TX-8050 also features Onkyo's proprietary technologies, such as IntelliFlo and Wide Range Amplification Technology (WRAT), which work together to provide optimal sound quality and performance. IntelliFlo optimizes the audio output based on the frequency response of the connected speakers, while WRAT reduces distortion during playback, especially at high volumes.

In terms of usability, the TX-8050 comes with an intuitive remote control and an easy-to-navigate on-screen display, making it simple for users to manage their audio settings and source selections. The receiver is also designed to be energy-efficient, featuring an eco mode that reduces power consumption while maintaining performance.

Overall, the Onkyo TX-8050 is a feature-rich and versatile stereo receiver that combines power, connectivity, and advanced audio technologies, making it an excellent choice for anyone looking to elevate their home audio setup. Its commitment to delivering superior sound quality and user-friendly functionality makes it a compelling option in the competitive audio market.