Onkyo TX-8050 instruction manual USB Device Playback, Others

Page 53

Troubleshooting—Continued

Can’t connect to the receiver from a Web browser

•If you’re using DHCP, your router may not always allocate the same IP address to the receiver, so if you find that you can’t connect to a server or Internet radio station, recheck the receiver’s IP address.

•Check the “Network Setup”.

USB Device Playback

Can’t access the music files on a USB device

•Make sure the USB device is plugged in properly.

•The receiver supports USB devices that support the USB mass storage device class. However, playback may not be possible with some USB devices even if they conform to the USB mass storage device class.

•USB memory devices with security functions cannot be played.

Others

Standby Power Consumption

•In the following cases, the power consumption may reach up to a maximum of 32 W:

1.You are using the Universal Port jack.

2.“Network Control” is set to “Enable” in the “Network Setup” setting.

The display doesn’t work

•The display is turned off when the Pure Audio mode is selected.

The functions don’t work

•To use , you must make an connection and an analog audio connection (RCA) between the component and receiver, even if they are connected digitally (page 16).

•While Zone 2 is selected, the functions don’t work.

The receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.

Before disconnecting the power cord from the wall outlet, set the receiver to Standby.

En-53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents TX-8050 Avis Important Safety InstructionsPower PrecautionsPreventing Hearing Loss Caution Batteries and Heat Exposure WarningPrecautions FeaturesClean Design Aluminum Front Panel Network Capability IPod/iPhone*1 Digital Direct Connection viaContents Aiming the Remote Controller Supplied AccessoriesFront Panel Getting to Know the ReceiverDisplay Getting to Know the ReceiverRear Panel Using the Remote Mode buttons Remote ControllerSpeaker Connection Precautions Connecting the ReceiverConnecting the Speaker Cables Strip about 5/8 15 mmConnecting a Power Amplifier Connecting the ReceiverConnecting a Powered Subwoofer Change the impedance value to 4 Ω using Configuring the Speaker ImpedancePress the Setup button on the remote Controller to complete the settingTips Connecting AntennasConnecting AV components Connecting Your ComponentsAbout AV Connections AV Cables and JacksHow to record a video source Connecting Your ComponentsSystem On/Auto Power On Connecting Onkyo  ComponentsRemote Control Direct ChangeConnecting the Power Cord Connecting a Recording ComponentChanging the Input Display Turning On the ReceiverTurning On and Standby Using Headphones Muting the Receiver remote controller onlyPress the remote controller’s Muting button Enjoying Audio SourcesUsing the Sleep Timer remote controller only Setting the Display BrightnessUsing the Tone and Balance Controls Enjoying Audio SourcesEnjoying the Pure Audio Sound Selecting the Listening ModeRecording the Input Source RecordingRecording Audio and Video from Separate Sources Prepare the recorderListening to AM/FM Stations Press the Tuning  or  buttonListening to the Radio Tuning into Stations by Frequency Presetting AM/FM StationsPress the remote controller’s D.TUN button Listening to the RadioName Edit Switching the DisplayLeft/Right SpaceRDS Program Types PTY Using RDS European model onlyWhat is RDS? Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Playing Music Files on the iPod/iPhone Using the USB/Network DeviceConnecting the iPod/iPhone Directly to the USB Port Playing the USB Device Using the USB/Network DeviceListening to vTuner Internet Radio Listening to the Internet RadioListening to Other Internet Radio Press NET buttonPlaying Music Files on a Server Registering Presets*1Start your computer or media server Press NET Use / to select DLNA, and press EnterWindows Media Player 12 Setup Windows Media Player 11 SetupUsing Remote Playback Remote PlaybackSelect the receiver from right-click menu Adjusting the VolumeOn Windows Media Player 12, right-click on music file Connecting to the Network Network/USB FeaturesNetwork Requirements Server RequirementsUSB Device Requirements Network/USB FeaturesSupported Audio File Formats About DlnaUP-A1 Dock Using the Onkyo DockIPod/iPhone Playback via Onkyo Dock RI Dock IPod/iPhone Playback via Onkyo DockControlling Your iPod/iPhone Extended mode Standard mode Dock Controlling Other ComponentsChanging the Advanced Setup Settings Advanced SetupExample Intelli volume setting procedure Intelli VolumeAdvanced Setup Menu Advanced SetupSource Setup Hardware SetupNetwork Setup Zone2 SetupVersion Firmware UpdateReceiver Via NET Via USBZone 2 Out Settings Connecting ZonePress the Setup button ZoneTobutton.turn off Zone 2, press the Zone 2 OFF Using ZoneMuting Zone Adjusting the Volume of ZoneChecking the Source Selected for Zone Followed by the  buttonEffective Sensor Layout If Remote Controller Signal Does Not Reach Other ComponentsMaking Sensor Connections Example for the main roomUpdate procedure Firmware UpdateUpdating the Firmware via Network Before you startUpdating the Firmware via USB Firmware UpdateTroubleshooting Select the USB input source Errors during an update via USBAmericas Europe China, Hong KongPower TroubleshootingAudio VideoUP-A1 Dock for iPod/iPhone TroubleshootingRecording ZoneOthers USB Device PlaybackAmplifier Section SpecificationsVideo Section Tuner SectionMemo En-56
Related manuals
Manual 2 pages 52.83 Kb

TX-8050 specifications

The Onkyo TX-8050 is a standout model in the world of integrated stereo receivers, designed to deliver exceptional audio performance and a wide array of features for both music lovers and home theater enthusiasts. This versatile receiver is known for its powerful amplification, robust connectivity, and user-friendly interface, making it an ideal choice for enhancing any audio system.

One of the main features of the TX-8050 is its impressive amplification capabilities. With a power output of 100 watts per channel, it can drive even the most demanding speakers, providing clear and dynamic sound across a variety of music genres. The use of advanced circuitry and high-quality components ensures low distortion, delivering a pure and immersive listening experience.

In terms of connectivity, the TX-8050 is well-equipped to handle all your audio sources. It offers multiple inputs, including six line-level inputs, a phono input for vinyl enthusiasts, and a digital audio input section featuring coaxial and optical connections. This ensures compatibility with various devices, including CD players, turntables, and digital streaming units.

A key highlight of the Onkyo TX-8050 is its built-in streaming capabilities, allowing users to access a wide range of online music services, including Pandora and Spotify. With the ability to connect to a home network via Ethernet, the receiver supports high-resolution audio streaming, ensuring that your digital music files are played back with remarkable fidelity. The inclusion of USB inputs further facilitates playback of music files stored on external drives, making it easy to enjoy your favorite tracks.

The TX-8050 also features Onkyo's proprietary technologies, such as IntelliFlo and Wide Range Amplification Technology (WRAT), which work together to provide optimal sound quality and performance. IntelliFlo optimizes the audio output based on the frequency response of the connected speakers, while WRAT reduces distortion during playback, especially at high volumes.

In terms of usability, the TX-8050 comes with an intuitive remote control and an easy-to-navigate on-screen display, making it simple for users to manage their audio settings and source selections. The receiver is also designed to be energy-efficient, featuring an eco mode that reduces power consumption while maintaining performance.

Overall, the Onkyo TX-8050 is a feature-rich and versatile stereo receiver that combines power, connectivity, and advanced audio technologies, making it an excellent choice for anyone looking to elevate their home audio setup. Its commitment to delivering superior sound quality and user-friendly functionality makes it a compelling option in the competitive audio market.
Top Page Image Contents