Mitsubishi Electronics XL8U, SL4U user manual When using the projector in Europe, Compliance Notice

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera- ture accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power-supply cord, it may cause interference with radio and television reception.

Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limit of a FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

When using the projector in Europe:

COMPLIANCE NOTICE

This LCD Video Projector complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

EN – 2

Image 2
Contents 8 S L When using the projector in Europe Compliance NoticeContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Clean the air-filter once a monthTerminal panel OverviewControl panel 3 4Remote control Bottom sideOperation range of the remote control Remote controlBattery loading Front projection InstallationLayout of the projector Front projection, ceiling mountingProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcComputer Projector + ComputerFor Macintosh About DDCPreparation for projection Adjustment of the projection anglePreparation Power-on Basic operationBasic operation Power-offVolume from the speaker Auto Position buttonBasic operation InstallationMenu operation Menu operation Computer Video mode to always output the audio that is Expand Mode .. Choose the mode for enlarging the image. SeeTerminal when Video is chosen as the source. Select Selected, the film mode will not be activatedColor temperature Image adjustmentImage adjustment About color temperatureAdjustment of the image from the computer Simple adjustment methodStill Advanced featuresExpand For XL8U only Picture in Picture PinPSet the background color Setting of the image displayed during startup or mutingSetting procedure Set the image sizeConnection Advanced featuresPage-up and page-down To USB portTo enable the password function Password functionTo cancel the password function Interval of lamp replacement Lamp replacementReset of the lamp operation time Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Filter cover Cleaning of the lensTroubleshooting Images arent projected on the screenImages arent projected correctly Troubleshooting OthersNormal condition IndicatorsPower Status Abnormal conditionSpecifications Kensington LockReplacement part Option / Not included in the box ConnectorsDimensional drawings unit mm What’s included in the boxSpecifications XGA85PC98 Mitsubishi Electric Corporation
Related manuals
Manual 5 pages 5.64 Kb Manual 5 pages 32.76 Kb