Mitsubishi Electronics UD740U manual Password lock commands, Pslock

Page 9

4.7 Password lock commands

The password lock commands control the password lock. The password lock enabling or disabling command is sent with a 4-digit password comprised of any figures 1 to 4 added to the end of the data code. When the password lock is enabled successfully, the projector sends a return command comprising the data code, password. When enabling the password lock fails, it sends a return command with “:N” at the end. There is no reconfirmation of the password.

ITEM

 

Function

 

Data

 

 

 

 

Character

 

ASCII

 

Password Lock enabling

PSLOCK****

50h 53h 4Ch 4Fh 43h 4Bh

**** is a 4-digit password comprised of any

 

 

 

 

figures 1 to 4.

[Example] When enabling the password lock. (In the case that the password is 1234):

Command sent from the PC, etc.

Status code returned

from the projector

Description

‘30’ ‘30’ ‘50’ ‘53’ ‘4C’ ‘4F’ ‘43’ ‘4B’ ‘31’ ‘32’ ‘33’ ‘34’ ‘0D’ 00PSLOCK1234

‘30’ ‘30’ ‘50’ ‘53’ ‘4C’ ‘4F’ ‘43’ ‘4B’ ‘31’ ‘32’ ‘33’ ‘34’ ‘0D’ 00PSLOCK1234

Command for enabling the password Lock

Response informing that the projector succeeded in enabling the password lock

9

Image 9
Contents Communications format InterfacePC-controllable functions ConnectionControl sequence Control command configurationACK/NAK AsciiPage Command [RS-232C control flowchart][Method of checking state of projector] Compatibility with the former modelsCommand list Operation commandsReading command diagram Volume +/VOLUMEEfficient Mode KeystoneHow to set the value Stby AudioAKS RstallPslock Password lock commandsExecution procedure of RS-232C commands via LAN